DimLux CO2 Sensor for Maxi Controller with 10m Cable

The Dimlux CO2 Sensor provides accurate information on the CO2 content of the atmosphere in your grow area. At the same time, it is also used to power the Dimlux CO2 Regulator, so that carbon dioxide is released according to how much CO2 is actually required, maintaining optimal levels at all times. The built-in light sensor will even let the system know when the lights are off, ensuring that CO2 is only distributed when necessary for the process of photosynthesis.

Provides accurate information on CO2 concentration

Ensures precise CO2 dosing at the correct ppm

Quick and easy, hassle-free installation

Built-in light cell for auto-shutdown during lights off

Dual-beam nondispersive infrared (NDIR) sensor

Powers a separate CO2 Regulator

Simple calibration using fresh, outside air

Ideal for closed loop systems - perfect for use with the Opticlimate

Comes with 10 metre cable

The Dimlux CO2 Sensor (With 10m Cable) Contains:

1 x CO2 Sensor, 1 x 2-pin to 3-pin adapter

How the Dimlux CO2 Sensor Works:

The Dimlux CO2 Sensor detects levels of carbon dioxide present in the surrounding atmosphere and feeds the information back to the (separately available) Dimlux Maxi Controller. The Sensor also powers the (separately available) CO2 Regulator.

This system ensures that optimal levels are distributed at all times, minimising wastage and maximising plant growth. The CO2 Sensor will even shut down CO2 distribution automatically during lights-off, thanks to it's built-in light cell.

CO2 supplementation is an absolute must in closed loop environments, where little-to-no fresh air is drawn in from outside. Users of the Opticlimate have been running their climate control systems in conjunction with the Maxi Controller's CO2 distribution system to great effect. The results are, quite simply, staggering!

Using the Dimlux CO2 Sensor:

The Dimlux CO2 Sensor will need to be hung in the canopy area at roughly the same height as your plants. Make sure that the light cell is exposed to light, otherwise it will not switch off automatically during dark periods. The CO2 Sensor has a built-in 2-pin plug on the back of the unit and comes with a 2-pin to 3-pin adapter so that it can be plugged into a UK mains supply. We recommend purchasing a separate extension cable so that the sensor can be positioned in a suitable spot.

The 2-pin socket on the front of the Sensor is used to power the separately available Dimlux CO2 Regulator. The Regulator attaches to a CO2 cylinder, releasing the gas whenever necessary via solenoid valve.

The sensor can be calibrated using the Maxi Controller. Outside CO2 levels sit at around 400ppm. By positioning the sensor in an outside area and taking a reading, you can then see how close the sensor is to detecting the correct level (400ppm). If the sensor is detecting levels above or below the correct ppm level, then the reading can be changed to the correct level, thus calibrating the system.

There are a number of items you can purchase that will help improve the performance of your Dimlux Maxi Controller and Dimlux Ballasts, which include the following:

Temperature Camera – measures leaf surface temperature for the most accurate and appropriate responses from your OptiClimate System and Dimlux Ballast(s)

Temperature Sensor with 5m/10m Lead – ensures that when temperatures go above the desired settings the Dimlux Ballasts are made to respond by dimming or turning off

Humidity Sensor with 5m Lead - enables your OptiClimate System to take into account the humidity level in the grow room when adjusting conditions