Sign up for our newsletter to receive exclusive discounts, promotions, and grow tips. We'll also keep you updated on the latest product releases.
Greentrees Hydroponics Multi Flow Site System (No Media)
The Greentrees Hydroponics Multi Flow System is essentially an ebb and flow hydro system. It uses gravity as its primary energy source for moving water through the system. The system is controlled by a unit assembly which consists of a 3.5 gallon container, with a timer and relay box mounted on the side, and float switches mounted inside of it. This controls the water levels in the system automatically.
The controller's timer pins have a duration of 15 minutes. This allows for precise control over watering cycles. Each pin pushed down on the timer will water the system for 15 minutes. Compare this to other systems, most of which have timers with 30 minute increments. Plants really only need to be watered to the point the roots are saturated and then the water should be drained out. Additional watering can cause problems. In this ebb and flow system, as the water is drained out it actually pulls oxygen down to the roots.
The Greentrees Hydroponics Multi Flow Site System is a simple. First you setup the pots on a level surface. Then you connect the pots together. Next you you connect the pump to the controller unit and set the desired watering times. After that, the nutrient solution will be pumped right when you scheduled it.
The pumping will continue and gravity will push the water out to the other pots. Once the desired watering level is reached the float switches will then cut the power to the pump in the reservoir. As long as the timer is on the system will maintain this watering level.
Once the timer turns off, the pump inside the controller is engaged and the nutrient solution is then pumped back into the reservoir. This will continue until the water level reaches the preset drain depth then the pump will be turned off. Since the pumps are only pumping a short distance, to and from the reservoir, wear and tear is greatly reduced and will ensure that your pumps last for a long time.
The two gallon pots used in the Multi Flow allow your plants to grow strong and tall while giving them a spacious container to produce a large root structure. The two gallon growing containers actually sit inside of other two gallon pots which serve as the watering cells. So, all the growing containers can be pulled out and moved around according to plant growth. You are not stuck trying to re-layout the system and cut new tubing or relocate a bunch of drippers, all you do is pull the plant and growing container out and move it to a new location. It couldn't be any easier to move your smaller plants directly under the lights and move your larger plants out to the perimeter of the room to promote uniform growth throughout the grow room. "Versatility" is the key word when describing the Multi Flow. It is easily expanded to a system consisting of up to 48 pots available with the 6 add on pot expansion.
These dimensions will help give you an idea of how large of a system you can fit into your grow room. The measurements will tell you how large all the parts are so you can lay your room out on paper first.
Controller Unit Assembly: 16" tall 12" wide 15" deep
55 Gallon Reservoir: 24" wide 36" tall
Individual Pots: 9-1/2" wide 14" tall
12 Pot System: 48 Square Feet, 7x7 Feet
24 Pot System: 96 Square Feet, 10x10 Feet
36 Pot System: 144 Square Feet, 12x12 Feet
48 Pot System: 194 Square Feet, 14x14 Feet
Greentrees Hydroponics Multi Flow Site System comes with a 30 day money back guarantee and a 12 month warranty.
|Name||Greentrees Hydroponics Multi Flow Site System (No Media)|