Sign up for our newsletter to receive exclusive discounts, promotions, and grow tips. We'll also keep you updated on the latest product releases.
The HI1294D is a pH electrode for the direct measurement of pH in soil and soilless media. The HI1294D has a glass body and is refillable. It has a single junction pH electrode with a DIN connector that is compatible with the HI9814 Groline portable pH/EC/TDS meter.
This electrode has a triple ceramic junction in the outer reference cell and the conic pH sensing tip is made with low temperature glass. There is an integrated amplifier and built-in temperature sensor for automatically temperature compensated pH readings.
The design consideration for the HI1294D is ideal for pH measurements in soils and hydroponics growing media including rockwool, coconut cour, perlite and other soilless substrates. The HI1294D can only be used with Hanna’s HI9814 Groline portable pH/EC/TDS meter.Hanna GroLine HI1294D Features:
The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. As the temperature of the glass decreases when in a sample at low temperature, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures. If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter.The HI1294D is suitable to use with samples that measure from -5 to 70oC.Conic Bulb
The conical shaped tip design allows for penetration into solids, semi solids, and emulsions. The HI1294D is ideal for the direct measurement of pH in soils and soil slurries.Glass Body
The glass of the HI1294D is resistant to many harsh and corrosive chemicals and is easily cleaned. The glass body also allow for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.Triple Ceramic Junction
The triple ceramic junction allows a higher flow rate of electrolyte from the reference cell into the measurement sample. A typical pH electrode will have a single ceramic junction that flow rate of 15 to 20 µL/hour. The HI1294D has three ceramic junctions in contact with the sample providing for a flow rate of 40 to 50 µL/hour. The increased flow provides a greater continuity between the reference electrode and the indicating electrode.Refillable
The HI1294D is a refillable probe. Since it is a single junction pH electrode the fill solution is the HI7071 3.5M KCl + AgCl. If using a refillable pH electrode, the fill cap should be removed prior to calibration and measurement. Removing the cap creates positive head pressure in the reference cell allowing for higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.DIN Connector
The HI1294D has a DIN connector that can only be used with the HI9814 GroLine portable pH/t/EC/TDS meter.
|Name||Hanna GroLine Direct Soil and Soiless Media pH Electrode for use with HI9814|