Check out our Reviews, Tests, Comparisons, & Information of all Solis Tek Digital Ballast
models to find the information you need to make an informed purchasing decision on the best ballast for your needs.
The SolisTek Ballast is a digital ballast on a software based platform. Utilizing Japanese components and unparalleled engineering, SolisTek is able to achieve a less than 1% return rate.
Dimming: 600W - 400W
Soft Start Technology
Powers 600w & 400w lamps
Constant Power Factor 99.9%
5.5A@120v / 2.75A@240v
CE and ETL Listed
Solis Tek Ballast Exclusive Features:
TOTAL HARMONIC DISTORTION (THD)
SolisTek Digital Ballasts are tuned for minimal Total Harmonic Distortion (THD%). SolisTek ballasts offer the cleanest burning ballast the industry has to offer. The results are longer ballast and lamp life and less depreciation of lumen and par output over time.
Sequential lamp ignition technology that will ignite your lamps one at a time based on load stability. This revolutionary technology (not a randomized startup) will actually detect the voltage and amperage frequencies of the electrical circuit and fire lamps when the load is most stable. SolisTek digital ballasts are the only ballast capable of this technology. Prevent surges and spikes in your electrical environment and stop overloading breakers. When you power multiple SolisTek ballasts, the electrical draw is controlled by our internal software, maximizing your electrical efficiency. Soft-Start technology are standard in all SolisTek Digital Ballasts.
Pre-ignition self-diagnostic checks, which will check for 8 different factors before attempting to power the lamp. Sense Smart checks for: open output, ignition failure, end of lamp life, over/low voltage, high/low temps (internal), thermal, overflow current, short circuit.
SOLIS BOOST OVERDRIVE
SolisTek's overdrive does not harm the longevity of the lamp. Contrary to industry standards, Solis Boost will only overdrive the lamp by 5%. Because STK ballasts are rated so efficiently, the extra boost in power will not affect the lamps lumen depreciation or shorten lamp life.
: You can use both 400w and 600w HPS and MH lamps on this ballast. If using a 400w lamp, simply put the ballast on the 400w setting. Both 400w and 600w HID lamps have the same operating voltage from the ballast, so using a 400w HID bulb on this ballast will not degrade the 400w bulb prematurely as some customers have been concerned about.