This item has been discontinued replaced with the newest model the Solis Tek Matrix v1.2 Double Ended (DE/SE) 1000W Digital Ballast
This is the original Solis Tek Matrix that ran only single ended bulbs and has now been discontinued. Solis Tek has made an updated model, the Solis Tek Matrix V1.2 Digital Ballast that now runs both single ended and double ended (DE) bulbs.
The SolisTek Ballast is a digital ballast on a software based platform. Solis Tek Ballasts utilize Japanese components and unparalleled engineering, SolisTek is able to achieve a less than 1% return rate.
Dimming: 1000W - 600W - 400W (SolisBoost can be applied to every setting)
Soft Start Technology
Powers 1000w, 600w, & 400w lamps
Constant Power Factor 99.9%
8.75A @ 120v / 4.375A @ 240v
CE and ETL Listed
Solis Tek Ballast Exclusive Features:
Optional Remote Control (purchased separately)
Exclusive SolisTek remote control will allow you to wirelessly configure the wattage settings and set the integrated digital timer for your SolisTek Matrix Ballast(s). Only 1 remote needed for all of your Solis Tek Matrix Ballasts.
BUILT-IN DIGITAL TIMER
Custom programmed settings for grow/bloom. Sync all SolisTek Ballasts on the same schedule with only 1 remote control. Eliminate unnecessary external components.
GREEN LCD SCREEN
Digital green read-out to visually display ballast settings and won't disrupt plant sleep cycle. Dark cycle-friendly!
BALLAST LIFE TIMER
Onboard ballast 'odometer' that will count the number of hours the ballast has been used. Industry's only ballast life timer! (multiply unit by 10 for actual usage hours)
TOTAL HARMONIC DISTORTION (THD)
SolisTek Digital Ballasts are tuned for minimal Total Harmonic Distortion (THD%). SolisTek ballasts offer the cleanest burning ballast the industry has to offer. The results are longer ballast and lamp life and less depreciation of lumen and par output over time.
Sequential lamp ignition technology that will ignite your lamps one at a time based on load stability. This revolutionary technology (not a randomized startup) will actually detect the voltage and amperage frequencies of the electrical circuit and fire lamps when the load is most stable. SolisTek digital ballasts are the only ballast capable of this technology. Prevent surges and spikes in your electrical environment and stop overloading breakers. When you power multiple SolisTek ballasts, the electrical draw is controlled by our internal software, maximizing your electrical efficiency. Soft-Start technology are standard in all SolisTek Digital Ballasts.
Pre-ignition self-diagnostic checks, which will check for 8 different factors before attempting to power the lamp. Sense Smart checks for: open output, ignition failure, end of lamp life, over/low voltage, high/low temps (internal), thermal, overflow current, short circuit.
SOLIS BOOST OVERDRIVE
SolisTek's overdrive does not harm the longevity of the lamp. Contrary to industry standards, Solis Boost will only overdrive the lamp by 5%. Because STK ballasts are rated so efficiently, the extra boost in power will not affect the lamps lumen depreciation or shorten lamp life.