TrolMaster QCD-CL2: Timer Climate & Lighting Master Controller

A climate controller featuring a short cycle timer for CO2 enrichment. It utilizes a 15 foot remote combined sensor with temperature, humidity sensor and a photocell to operate your temperature, humidity, CO2 system. It gives you the ability to set day and night temperature levels. Can control the recycling time of fans, and lights accurately. It features a remote temperature sensor that can be placed up to 15 feet from the controller to monitor temperature and lighting.
$205.89

Commercial & Large Grow Operations

• Custom volume discounts • A dedicated representative • Financing available from $10K to $1M • Professional Services & Financing Inquiries: 1.866.443.4533
Frequently bought together

Additional Information

Name TrolMaster QCD-CL2: Timer Climate & Lighting Master Controller
Brand TrolMaster
SKU QCD-CL2
Weight (lbs) 2
Dimensions 180mm x 175mm x 75mm
Watts 1200w
Voltage 120v
Amps 14.5A @ 120V
MSRP $280.00
Financing Available- Apply Now!

Price Beat Guarantee - We BEAT Competitors!

Commercial Discounts Available

Details
TrolMaster QCD-CL2: Timer Climate & Lighting Master Controller

The TrolMaster QCD-CL2: Timer Climate & Lighting Master Controller is a 32-BIT ARM microprocessor based climate controller featuring a short cycle timer for CO2 enrichment. It utilizes a 15ft remote combined sensor with temperature, humidity sensor and a photocell to operate your temperature, humidity, CO2 system. QCD-CL2 gives you the ability to set day and night temperature levels.

The TrolMaster QCD-CL2: Timer Climate & Lighting Master Controller can control the recycling time of fans, light, light mover for your grow room accurately. It features a remote temperature sensor; it will detect unsafe (high) temperatures and turn off the HID lights in the event of a ventilation failure. The remote NTC temperature sensor can be placed up to 15 feet from the controller to monitor over temperature and shut down HID light.

The controller has 4 AC receptacle outlets and one DC24V outlet:

  • Temperature device output:
  • In decrease mode, plugged into a fan to exhaust air if the temperature is above the set point. Or the output can be used to activate an A/C unit.
  • In increase mode, the output is intended to be hooked up to a heat source.
  • Humidity device output: it can be used to dehumidify or humidify the grow room. You can have a dehumidifier or fan plugged in to dehumidify your room. When in humidification mode, a humidifier may be used.
  • Light device output: the outlet is intended to operate HID lights. You may use up to 600 Watts HID light. The QCD-CL1 may also be used to operate larger lighting banks by plugging the relay trigger cord set into this output and setting the timer to run your lights. Do not exceed 600 Watts per outlet when using these outputs.
  • Recycling Timer Output: This output can be used with a pump, fan, etc.
  • CO2 generator DC24V output: connect CO2 generator to enrich your CO2 PPM in your grow room depending on a short cycle timer. The output also can be connected to 24VDC solenoid valve for a CO2 tank. For 50/60Hz 24VAC solenoid or 120/240VAC solenoid needed to use compatible DC to AC inverter. Note: the outlet could output 24VDC/0.4A max.
  • The digital nature of the TrolMaster QCD-CL2 allows you to control your grow room to whatever specifications you desire. The TrolMaster QCD-CL2 is built with the highest quality components to assure years of trouble-free climate control.

    Specifications:
    • Input Voltage: 120V
    • Maximum Amperage: 14.5A @ 120V
    • Backup Battery: CR1220
    • Remote Probe Cable Length: 15 ft
    • Temperature Control Range: 41-113°F
    • Temperature Accuracy: ± 2°F
    • Temperature Deadband: Adjustable
    • Humidity Control Range: 35-99.9% RH
    • Humidity Accuracy: ± 3% RH
    • Humidity Deadband: Adjustable
    • CO2 On Time Range: 1 second to 96 hours
    • CO2 Off Time Range: 1 second to 96 hours
    • Remote NTC Temperature Probe Cable Length: 15 ft
    • High Temperature Shutdown: Adjustable
    • Maximum Lighting Watts: *1200 watts
    • Recycling ON Timer Range: 1 second to 96 hours
    • Recycling OFF Timer Range: 1 second to 96 hours
    • Controller Weight: 1.20Kg
    • Sensor Weight: 0.15Kg
    • Dimensions: 180x175x75mm