Humidifiers

A greenhouse humidifier holds relative humidity at your set point, so cuttings root and leaves keep transpiring when lights and heaters dry the air. Pick the CloudForge T3 for a tent, the T7 or Ideal-Air Pro for a grow room, and the AquaFog fog fan for a greenhouse.

4 products

Humidifiers

Greenhouse Humidifiers: Grow Tent, Grow Room and Fog Systems

Greenhouse humidifiers put water vapor back into the air when lights, heaters and exhaust fans dry a space out. The range starts with tent-sized AC Infinity CloudForge units. It moves up to the Ideal-Air Pro Series, rated at up to 600 pints a day, and the AquaFog Turbo XE-2000 fog fan....

Greenhouse humidifier infographic: tent, room and fog fan types, key specs, best uses and how to choose by space

A humidifier works best with a controller that shuts it off at your set point, so see our humidity controllers. When the air is too wet instead, the fix is our dehumidifiers. Both sit in the wider HVAC range.

Types of Humidifiers for Growing

Grow Tent Humidifiers

The CloudForge T3 holds 4.5 liters and puts out about 240 ml per hour. Its hose runs over 4 feet, so vapor goes where you aim it. A corded probe drives humidity or VPD triggers. Pick it for one tent or a small clone room.

Grow Room Humidifiers

The CloudForge T7 steps up to a 15-liter tank and 1,300 ml per hour, with a valve that refills from a water line. For larger rooms, the ultrasonic Ideal-Air Pro Series plumbs into a standard inlet. It holds a set point from 30% to 90% RH.

Fog Fans for Greenhouses

The AquaFog Turbo XE-2000 atomizes water without nozzles or a high-pressure pump and throws fog 30 to 35 feet. Droplets measure 5 to 10 microns at low output. Greenhouses use it for humidity and evaporative cooling.

How Growers Use Humidifiers

Propagation needs the most moisture. MSU Extension advises holding cuttings near 0.3 kPa VPD, which means air close to saturation. Hot rooms under lights also pull water from leaves faster than young roots replace it. Back off at 85% RH, where UMass Extension puts the start of Botrytis risk.

Frequently Asked Questions

Which industrial humidifiers are best for greenhouses?

For a full greenhouse, choose a fog fan or a plumbed ultrasonic unit. The AquaFog Turbo XE-2000 throws fog 30 to 35 feet and also cools the air. The Ideal-Air Pro Series is rated at up to 600 pints a day and runs from a water line with a sediment filter.

What's the best type of humidifier for a grow room?

An ultrasonic humidifier suits most grow rooms. It makes a fine, cool mist, so it adds moisture without adding heat to a room the lights already warm. The CloudForge T7 and Ideal-Air Pro Series are both ultrasonic. Use low-mineral water, since the EPA notes these units spread tap water minerals.

Do I need a humidifier in my grow tent?

Often, yes, for seedlings and clones. Exhaust fans and grow lights dry a tent quickly, and small roots can't keep up. A compact unit like the CloudForge T3 holds a target RH or VPD from its probe. If your hygrometer already reads high, add airflow instead.

Where to place a humidifier in a grow tent?

Aim the vapor into moving air above or beside the canopy, not straight at the leaves. The CloudForge hoses let the unit sit on the floor while the mist goes where it is needed. Keep mist away from lights and plugs, and set the sensor at canopy height.