Water Pumps + Air Pumps

Agriculture water pumps keep feed moving from reservoir to plant and hold pressure steady across drip zones, while air pumps oxygenate the tank. Small systems run a submersible pump, drip rooms add a self-priming or pressure pump, and DWC reservoirs add an air pump.

62 products

Water Pumps + Air Pumps

Agriculture Water Pumps and Air Pumps for Greenhouses and Grow Rooms

Agriculture water pumps move feed from the tank to the plants, drain trays and boost line pressure for drip zones. Air pumps push oxygen into the reservoir. This collection runs from a 132 GPH reservoir pump to DAB pressure systems and a 3,120 GPH pit pump for commercial rooms....

Agriculture water pumps infographic: submersible, inline and self-priming pumps, pressure systems, air pumps, GPH sizing

To narrow it down, browse submersible pumps, inline pumps or air pumps. All three sit in the wider air, water and CO2 range.

Types of Pumps

Submersible Pumps

Active Aqua, EcoPlus and AC Infinity pumps sit in the reservoir for circulation and top feed. The EcoPlus Convertible runs in under 1/2 inch of water. For moving volume, the Leader Ecodiver 750 pushes 1,560 GPH, and the Mondi 1585 has an oil-free, water-cooled motor.

Inline, Self-Priming and Pressure Pumps

Inline pumps sit outside the tank and pull water in. The DAB JETCOM 132 self-primes from 26 feet below and reaches 87 psi. A DAB E.SYBOX Mini holds a set pressure with an inverter, so drip zones get even flow.

Air Pumps

The Active Aqua AAPA45L moves 45 liters a minute on 20 watts through six valved outlets. The Aeromixer kit mixes and aerates a tank with one pump.

How Growers Choose a Pump

Match flow to reservoir size, then check the rated flow at your lift height, since flow drops as head rises. Leave some headroom, because a valve can trim extra flow but nothing adds flow a pump lacks. Pumps that pull from a tank need a self-priming design.

Frequently Asked Questions

How many GPH pump do I need?

Start with the reservoir. Active Aqua pairs its 250 GPH pump with 20 to 29 gallons and its 400 GPH pump with 30 to 49 gallons. Then check lift, since flow falls with height. AC Infinity rates its 396 GPH pump to about 5 feet of lift.

Submersible vs inline pump: what is the difference?

A submersible pump sits in the water and can only push it out. An inline or self-priming pump sits outside the tank and pulls water in. DAB notes its JETCOM clears air from the suction line on its own, so a tank that ran dry does not need hand priming.

How do you pump water from a storage tank?

Use a self-priming pump or a pressure system set beside the tank. The DAB JETCOM 132 draws from 26 feet below the pump body. The E.SYBOX Mini adds a pressure vessel and sensors, so pressure holds steady when several emitters open at once.