HLG Scorpion Rspec 600W LED Grow Light | 240V, 1,584 µmol/s, 5x5 ft

HLG Scorpion Rspec Output, Boards and Driver

This fixture dims with a manual knob from 60W up to its full rated draw. At full power it is rated at 1,584 µmol/s, or 2.62 µmol/J. Light comes from 6 quantum boards of 288 diodes each. They carry Samsung LM301H white at 3500K plus 660 nm deep red. An Inventronics driver accepts 100–277V at 50–60 Hz, so the fixture works on 120V, 240V or 277V. This is the 240V version. The frame measures 38.5 x 36 x 2.75 in and weighs about 20 lb. Cooling is passive through the boards' aluminum backing, with no fans. The fixture carries UL and CSA listings. Retail listings show a 3-year HLG warranty on this model.

Running a 600W LED Grow Light Over a 5x5 Canopy

A 600w led grow light spread across six boards gives a 5x5 tent even light without a hot center. HLG rates the flowering footprint at 5 x 5 ft with the light just 12 inches over the tops. That low hang height helps in tents and rooms with little headroom. For veg, raise it to 24 inches and it covers about 6 x 6 ft. The recommended working range is 10 to 18 inches above the canopy in flower. Start dimmed for seedlings and young plants, then climb toward full output after the flip. Watch for bleaching on the highest tops as intensity rises. The deep red diodes add flowering push that white-only boards lack. Plants under LED usually drink less than under HPS, so check pot weight before watering. HLG rates it as a replacement for a 1000W HID, though a 3x3 tent is too small for its full output.

Key Features

• 1,584 µmol/s at 2.62 µmol/J: Full 5x5 flower output from 600W.
• Six 288-diode boards: Samsung LM301H 3500K white plus 660 nm deep red.
• 60–600W knob dimming: One fixture from seedlings to full flower.
• Low hang height: Flowers a 5x5 from as little as 12 inches.
• Universal Inventronics driver: 100–277V input; supplied here as the 240V version.
• Passive and listed: No fans, UL and CSA listed.

Technical Specifications