
Where the TurboKlone T24 Fits in a Small Room
Not every grower needs ninety six sites. A hobby room or a small perpetual harvest runs on a handful of cuttings at a time. A machine sized past that becomes a cleaning chore rather than a tool. This one holds twenty four sites in a footprint of 18 by 14 inches. Filled, it weighs under twenty four pounds, which means it can live on a shelf and come down to a sink without help. The reservoir takes two gallons. A 250 gph pump feeds a compact manifold, and the same side mounted fan used across the range spins at 3,600 rpm. That fan is the reason the machine exists at all. It pulls heat out of the spray and drives dissolved oxygen up. The reservoir then needs no chiller and no timer to stay in range. Everything runs from a standard 120 volt outlet.
Running an Aeroponic Cloner Without a Chiller
This kind of machine sprays bare stems rather than sitting them in a medium. That is why it roots fast, and why it is unforgiving when conditions drift. Hold the water between 65 and 75 degrees Fahrenheit. Hold the pH between 5.5 and 6.3. Those two numbers do most of the work, and the fan is what makes the first one achievable in a warm room. Assembled, the unit stands 11.5 inches tall, and a humidity dome is sold separately if you want one. Use a dome for the first days only, then take it off so the cuttings learn to transpire before they are potted. Clean the manifold between runs rather than at the end of the season. The curved walls exist so a rinse actually reaches everywhere, and a machine this size takes about a minute to do properly. Custom polyethylene collars are included, and a spare set is worth keeping, since the collars are the part that wears.
Key Features
- Twenty Four Sites: Enough for a small perpetual harvest without leaving two thirds of a larger lid standing empty.
- Small Footprint: At 18 by 14 inches it sits on a shelf, and filled it stays under twenty four pounds to carry.
- Side Mounted Fan: The 3,600 rpm fan strips heat from the spray and raises dissolved oxygen without any extra equipment.
- Two Gallon Reservoir: A small volume is quick to change, which encourages the frequent water swaps cuttings prefer.
- Collars Included: Custom polyethylene collars ship with the machine, and replacements are available separately.
- Dome Optional: A humidity dome is sold separately, so growers in a humid room are not paying for one they will not fit.
Technical Specifications
| Specification | Value |
|---|---|
| Clone Sites | 24 |
| Assembled Dimensions | 18 x 14 x 11.5 in |
| Packaged Dimensions | 18 x 14 x 9 in |
| Manifold | 5 x 4 x 3 in |
| Reservoir | 2.0 gallons |
| Pump | 250 gph |
| Fan | 3,600 rpm |
| Power | 120 V |
| Weight Filled | 23.68 lbs |
| Cutting Medium | Custom polyethylene collars, included |
| Water Temperature | 65-75 F |
| Water pH | 5.5-6.3 |
| Humidity Dome | Sold separately |