Green Air CT-DH-1 Cooling Thermostat and Dehumidistat
The CT-DH-1 turns on exhaust or intake fans to pull unwanted heat and humidity from a grow space. Internal sensors hold a 7°F temperature comfort zone (3°F with a remote bulb) and a 5% humidity span. All four outlets are integrated, so any trip fires everything plugged in. Set your target temperature and humidity on the dials.
Placing an Integrated Climate Controller
Plug in circulation fans, exhaust fans, cooling gear, or a dehumidifier across the four outlets. Locate it where it samples average room air, not in a draft or direct light. Good circulation around the controller keeps its readings honest. It runs on 120V with a 15A maximum switching capacity. It is built for indoor use only.
Key Features
- Temp and humidity control: Runs fans to pull both heat and moisture from the room.
- 7F comfort zone: Holds a 7F band (3F with a remote bulb) before cycling.
- 5% humidity span: Tight differential keeps humidity from swinging wide.
- 4 integrated outlets: Any temperature or humidity trip fires all four outlets.
- 120V, 15A switching: Handles fans, coolers, and dehumidifiers up to 15A.
Technical Specifications
| Specification | Value |
|---|---|
| Function | Cooling thermostat + dehumidistat |
| Outlets | 4 (integrated) |
| Temperature Span | 7°F (3°F with remote bulb) |
| Humidity Span | 5% |
| Control | Dial set |
| Power | 120 VAC, 15 A max switching |
| Use | Indoor only |