House & Garden Pour Spout for 5 L and 10 L Nutrient Containers

House & Garden Pour Spout: One Fit for 5 and 10 Liter Jugs

This spout is made for the mid-size House & Garden containers, fitting both the 5 liter and 10 liter jugs. Pouring a dose straight from a wide opening often means overshooting the line on the cup. The spout narrows the flow so concentrate leaves the jug as a steady stream. A controlled pour is easier to stop right at the mark you want. It also keeps drips off the outside of the jug, where residue gets sticky and attracts dust. House & Garden sells the part under number HGSPOUT510. Because one spout fits two sizes, a 5 liter and a 10 liter jug of the same product can share it. That suits growers who start a product in the smaller size and move up later. Keep the spout with a single product so nothing mixes between bottles. The EAN for this spout is 8718531713529.

Daily Use of a Nutrient Bottle Spout

Shake the jug before every feed, because many concentrates settle while they sit. Fit the spout and set the jug on a level surface at working height. Tip it slowly and let the stream start before you bring the cup underneath. Measure into a graduated cup or syringe rather than pouring by eye into the tank. Add the measured dose to the reservoir in the sequence your feed chart lists. With a two-part base, give part A and part B their own spouts and never trade them. Undiluted A and B can react on contact, which wastes nutrient and can leave deposits. Wipe the spout tip once you finish so nothing hardens around the opening. Before moving a spout to another product, rinse it in warm water and let it dry. Refit the original cap for longer storage, and keep jugs upright and out of direct light. A few seconds of care per feed keeps doses accurate across the whole run.

Key Features

• Fits two sizes: Works on House & Garden 5 L and 10 L containers.
• Steady, aimed stream: Makes it easy to stop at the line on the cup.
• Fewer drips: Keeps residue off the outside of the jug.
• Moves up with you: Shares one spout between a 5 L and 10 L of the same product.
• One spout per product: Prevents carry-over between nutrients.

Technical Specifications