Hurricane Classic 6 inch Clip Fan | 306 CFM, 14W, 2-Speed, UL

306 CFM on 14 Watts From a 6 Inch Clip Fan

The airflow-per-watt here is the headline. 306 CFM at 2,350 RPM on high, from 14W at 120V. Very little else in this size moves that much air for that little draw. Three blades sit behind a metal grill, and the neck support is steel rather than moulded plastic. The body itself is plastic, which is where the weight saving comes from at 1.88 lbs. That trade leaves a fan light enough for a thin shelf lip.

Putting a Hurricane Classic Clip Fan Where It Works

The spring clamp is genuinely strong, which is the main reason this one stays put on a round tent pole. Set the tilt by hand and it holds. There is no oscillation, only adjustable tilt, so treat it as a directed fan. Speed changes happen at a button on the head, so mount it where you can still reach it. On low it is unobtrusive enough for a propagation shelf. The cord is five feet, it is UL listed, and it carries a one-year warranty. Wipe the metal grill between runs and it will outlast the tent it hangs in.

Key Features

• 306 CFM at 14W: Unusually high airflow per watt for a clip fan this size.
• 2,350 RPM on High: A real high setting, with a second speed for propagation.
• Metal Grill: Metal rather than moulded plastic, so it survives being knocked.
• Steel Neck Support: The joint that usually fails on clip fans is steel here.
• Strong Spring Clamp: Holds on round tent poles where weaker clips rotate loose.
• Adjustable Tilt: Aim it by hand and it stays at the angle you set.
• UL Listed: Listed to UL, with a 120V five-foot cord and one-year warranty.

Technical Specifications