Integra Boost 8g 62% Humidity Packs Hold an Ounce at 62% RH
Each 8 g pack reads the air inside a sealed container and moves moisture either way until it settles at 62% RH. That is the general-purpose storage setpoint, and where most cured material ships. The fill is a plant-based glycerin and water blend, 100% salt-free and 99% biodegradable. Nothing crystallizes onto what it rests against, which is the practical difference from a salt-solution pack. One pack covers up to 28 g, the standard ounce jar most people are filling. Below that it is oversized and simply lasts longer; above it the jar never reaches the number. The membrane is spill-proof and stays pliable, so a packet pushed around a bin does not split.
Individually Wrapped Humidity Control Packs With an Indicator Card
Every pack ships in its own overwrap, so it stays dormant on the shelf and only starts working when you tear it open at fill. Inside is a Replacement Indicator Card whose dot runs pink to blue when the pack is spent. That removes the guesswork bulk packs leave you with. This one is sold as a single rather than a case. A small operation can match the count to one run instead of committing to 300 packets it will not get through. The trade is per-packet cost, which is higher here than on any bulk configuration. Give it a day or two before judging the result, because the pack works long before the contents read right. In use it runs two to four months, and Desiccare puts it at up to a year in a container that is rarely opened.
Key Features
- 62% RH Two-Way Control: Adds moisture to a jar that has dried out and pulls it back after the lid has been off.
- Covers Up To 28 g (1 oz): Matched to a standard ounce jar, where an oversized pack would overshoot the headspace.
- 100% Salt-Free Formula: Plant-based glycerin and water, so no salt crystals end up on the material touching the packet.
- Individually Overwrapped: Each pack stays inert until opened, so stock held for months is still full strength at fill.
- Replacement Indicator Card Included: The dot turns pink to blue when the pack is done, so nothing is guessed or timed.
- 99% Biodegradable, Non-Toxic: Zero off-gases, and spent packs leave with ordinary room waste.
- FDA Compliant, Food Grade Inks: Rated to sit in direct contact with stored product, which is how these get used.
- Spill-Proof and Tear-Resistant: Stays pliable under handling, so a snagged pack does not empty into the jar.
- 2 Year Shelf Life: Overwrapped stock keeps, so holding stock ahead does not mean losing packs to age.
- Sold as Single Packs: Match the exact count a run needs instead of committing to a full case.
Technical Specifications
| Specification | Value |
|---|---|
| Pack Size | 8 gram |
| Relative Humidity | 62% RH |
| Humidity Control | 2-way (releases and absorbs moisture) |
| Coverage per Packet | Up to 28 g (1 oz) of contents |
| Packet Dimensions | 2.5" × 2.75" |
| Sold As | Single pack |
| Individual Overwrap | Yes — each pack sealed until opened |
| Humidity Indicator Card | Included — dot turns pink to blue when spent |
| Composition | Proprietary blend of plant-based glycerin and water |
| Salt Content | 100% salt-free |
| Biodegradability | 99% biodegradable, plant-based |
| Toxicity | Non-toxic; releases zero harmful chemicals or off-gases |
| Food Contact | FDA compliant and safe for food contact |
| Printing | Food grade inks |
| Membrane | Spill-proof, tear-resistant, pliable |
| Flavor / Aroma Impact | Does not alter flavors or aromas |
| Shelf Life (overwrapped) | 2 years from date of manufacture |
| In-Use Life | Typically 2–4 months; manufacturer states up to a year in a rarely opened container |
| Technology | Patented 2-way humidity control |
| Manufacturer | Integra by Desiccare, Inc. |
| Documentation | ISO, QPL and FDA certifications available from the manufacturer on request |
| UPC | 802359000201 |
| SKU | 748304 |
How Long Does an Integra Boost 8g Pack Last?
In a sealed ounce jar opened a few times a week, expect two to four months. A jar that stays shut can run considerably longer, and heavy daily opening cuts it short.
How Do You Use an Integra Boost Humidity Pack?
Tear the overwrap, drop the pack into an airtight container with the indicator card, and seal it. It pulls the container to 62% RH from there with no further input.
Should You Use 55% or 62% Integra Boost?
62% keeps more moisture in and is the usual pick for material moving to a customer. 55% runs drier and suits denser flower or a long hold.
How Much Does an 8g Pack Cover?
Up to 28 g, a standard ounce. The 4 g covers a half ounce, the 67 g a full pound, and the 1 g suits a single eighth.