iLuminar Under Canopy 3 Ft Power Cord Extension

iLuminar under canopy power cord for tight 3 ft daisy-chain runs

The 3 ft cord links closely spaced under-canopy fixtures without leaving slack to coil on the canopy. It carries the AC line and the 0-10V dim signal along the chain on a single cord. Daisy-chain capacity scales with voltage: 12 fixtures at 120V, 24 at 240V, and 28 at 277V. That keeps the loom clean where a dozen bars share one bench. The short 3-foot length keeps wiring tight at the controller end of a rack. It suits vertical racks and rolling benches where fixtures sit close together.

Compact daisy-chain under canopy cord for streamlined racks

Growers reach for the 3 ft cord where fixtures sit almost end to end and the 6 ft version would leave a loop. A 277V circuit carries a full 28-fixture run, so one feed lights a tall rack. The connector matches the iLuminar Under Canopy line and other fixtures that share the same plug. For longer gaps, the 6 ft main-line cord with a 0-10V port is the companion piece. One note: it is an extension, so a powered iLuminar input cord still starts the chain. Keep runs tidy by matching cord length to fixture spacing.

Key Features

• 3 ft Compact Length: Trims slack between closely spaced under-canopy fixtures on one rack or bench.
• 120/240/277V Support: Carries 12 lights on 120V, 24 on 240V, or 28 on 277V circuits.
• AC + 0-10V Dim Line: Passes power and the dim signal along the chain on a single cord.
• iLuminar Compatibility: Fits iLuminar Under Canopy fixtures and others sharing the same connector.
• Daisy-Chain Ready: Built for chained installs to keep controller wiring minimal.

Technical Specifications