Netafim Oval Tube 2 inch Lay-Flat Sub-Main
The Netafim Oval Tube 2 inch is a lay-flat polyethylene sub-main that feeds a row of stakes or drippers. It lies flat when empty and rounds out under pressure, holding up to 42 psi. Punch it and insert takeoffs right into the wall, no separate manifold needed. This coil runs 250 ft.
Rolling Out a Retrievable Lay-Flat Irrigation Sub-Main
Growers roll it down a bench or bed row as the feed line, then punch in spray-stake or dripper takeoffs where each pot sits. Under 42 psi it firms into a round bore that carries the zone. When the crop finishes, it rolls back up flat to store or move to another house. The 2 in size carries higher flow than the 1 in and 1.25 in oval tubes.
Key Features
- Lay-flat design: Rolls up flat to store or move between houses.
- 42 psi rating: Firms into a round bore to carry a full row under pressure.
- 2 in size: Higher flow than the 1 in and 1.25 in oval tubes.
- Punch-in takeoffs: Insert spray-stake and dripper fittings directly into the wall.
- 250 ft coil: A full bench or bed row per coil.
Technical Specifications
| Specification | Value |
|---|---|
| Model | OT2.00-42-250 |
| Type | Lay-flat oval PE sub-main |
| Size | 2 in |
| Pressure Rating | 42 psi |
| Coil Length | 250 ft |
| Use | Greenhouse / nursery sub-main |