Skip to product information
1 of 1
Brand: Active Aqua

Active Aqua Submersible Pump Filter Bag 10.5 x 13.125 in, Pumps to 1000 GPH

Active Aqua Submersible Pump Filter Bag 10.5 x 13.125 in, Pumps to 1000 GPH

SKU: SKU:AAPB10

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $13.62 USD
Regular price Sale price $13.62 USD
Sale Sold out
Shipping calculated at checkout.

The Active Aqua submersible pump filter bag wraps pumps up to 1000 GPH in fine, zippered mesh. This 10.5 x 13.125 in pump bag catches roots, media fines and nutrient sediment before they reach the impeller. Flow stays steady and cleanups come less often.

View full details

Active Aqua Submersible Pump Filter Bag 10.5 x 13.125 in

A submersible pump pulls in whatever drifts through the reservoir. Root hairs, perlite fines, coco particles, algae and settled nutrient salts all end up at the intake. This zippered mesh bag encloses the whole pump, so that debris builds up on the outside of the mesh instead of inside the impeller housing. It measures 10.5 x 13.125 inches. Active Aqua rates it for most pumps up to 1000 GPH. That covers the pumps behind flood tables, large drip manifolds and multi-site recirculating systems. The fine mesh traps the biological and nutrient sediment common to hydroponic reservoirs while water passes through. A gusseted bottom gives the pump a flat base, so it sits upright on the reservoir floor. The zipper along the top is corrosion-proof, which matters for a part that lives full-time in nutrient solution. A clean intake keeps flow steady, so trays flood to the same height and emitters deliver the same volume every cycle. Less grit reaching the impeller also means less wear on the pump. Hydrofarm lists it for flood and drain and drip systems.

Fitting a Pump Bag in the Reservoir

Unplug the pump before it goes anywhere near the water. Open the zipper and slide the pump in with its outlet toward the top of the bag. Bring the outlet fitting and power cord out through the opening, then close the zipper as far as the tubing allows. Settle the pump on the reservoir floor so the gusseted base sits flat. Watch flow at the far end of the system over the next few cycles. Weaker output later on usually means the mesh needs cleaning. Inspect the bag at every reservoir change. When sediment coats the outside, pull the pump, unzip the bag and rinse it under clean water. A soft brush clears salt crust that a rinse leaves behind. Clean the pump intake at the same time, since the finest particles can still collect there over long runs. Kept clean, the bag protects the pump crop after crop with far less time spent pulling impellers apart.

Key Features

  • Fine Mesh Filtration: Traps biological and nutrient sediment common to hydroponic reservoirs.
  • Pumps up to 1000 GPH: Fits most submersible pumps in the class that runs flood tables and large drip lines.
  • Gusseted Bottom: Gives the pump a flat base so it seats upright on the reservoir floor.
  • Corrosion-Proof Zipper: Closes the top securely and holds up to constant contact with nutrient solution.
  • Removable for Cleaning: The pump slides out in seconds for rinsing the mesh and servicing the intake.

Technical Specifications

Specification Value
Brand Active Aqua (Hydrofarm)
Item Number AAPB10
Bag Dimensions 10.5 x 13.125 in
Pump Compatibility Most submersible pumps up to 1000 GPH
Filter Fine mesh
Closure Corrosion-proof zipper
Bottom Gusseted
Systems Flood and drain, drip
Shipping Weight 0.1 lb