![[DLW-GMC] GROW1 multicolor 2 in neoprene inserts, 192 piece pack](http://growershouse.com/cdn/shop/files/dlw-gmc-171102-1794949117827-2-webp.webp?v=1794954558&width=1445)
Colored Neoprene Inserts for Sorting Cuttings at a Glance
A cloner full of identical collars makes it hard to tell one variety from the next. This GROW1 pack solves that with 192 inserts, 32 each in red, orange, yellow, green, blue and purple. Each disc measures 2 in across and 0.5 in thick, with a slit from the edge to the center. A stem slides in from the side, and the soft neoprene closes around it without crushing the fresh cut. The collar keeps each cutting from rocking, so the base stays in the mist or water where roots start. Unlike a hard lid, the foam flexes as the stem thickens over the first week or two. Assign one color per variety and the whole tray reads like a chart. The colors also track dates, so the oldest batch is easy to spot when it is time to transplant. The mixed pack weighs about 0.9 lb. It stores flat in a drawer between runs.
Setting Up a Color Coding System in the Cloner
Pick a color for each mother plant before the first cut is taken. Write the key on a strip of tape on the cloner lid so anyone on the crew can read it. Trim each cutting, make a clean angled cut and slide it into the matching collar. Leave an inch or two of stem below the disc, then press the insert into its site. In an aeroponic cloner, check that every hanging stem sits in the spray zone. In net cups or DWC, the stem base should reach the moisture line. When roots show, lift the plant out with its collar and the color stays with it into the next stage. That keeps varieties sorted on the bench even after they leave the cloner. Between runs, wash the inserts and soak them in a diluted sanitizer. Rinse them well, dry them completely and sort them back by color for the next round.
Key Features
- 192-Piece Mixed Pack: 32 each of red, orange, yellow, green, blue and purple.
- 2 in Diameter: Sized to sit inside 2 inch net pots.
- 0.5 in Thick: Holds a stem upright without media.
- Center Slit: Stems slide in from the side and the foam closes around them.
- Soft Neoprene: Grips without crushing tender tissue.
- Built-In Color Coding: Mark varieties, mothers or dates at a glance.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | GROW1 |
| Product | Neoprene insert, cloning collar |
| Colors | Red, orange, yellow, green, blue, purple |
| Diameter | 2 in |
| Thickness | 0.5 in |
| Material | Neoprene |
| Design | Slit from edge to center |
| Pieces per Pack | 192 |
| Count per Color | 32 red, 32 orange, 32 yellow, 32 green, 32 blue, 32 purple |
| Pack Weight | 0.9 lb |
| Package Dimensions | 16 x 11 x 2 in |
| Uses | Cloning machines, aeroponics, net pots, hydroponic systems |
| SKU | 171102 |
| UPC | 816731012355 |