EZ-Clone 2 in Neoprene Cloning Inserts, Hard, Pack of 35

Hard Cloning Collars That Hold a Cutting Straight

A cutting that slumps in its hole roots slower than one held upright. These collars solve that with a 2 in neoprene disc that grips the stem without crushing it. Foliage stays above the lid in air and light. The stem drops straight into the misting chamber with nothing in its way. Each pack holds 35 collars, which fills a 32 site machine with three to spare. Hard density is the stiffer of the two neoprene options. It supports heavier, woodier cuttings that would sag in a soft collar. Softer stock and thin green tips do better in the soft version. The material arrives sterile, so there is no soak or rinse before the first run. EZ-CLONE lists the same collar in 17, 65 and 280 counts for larger rooms.

Fitting the Collars to an EZ-Clone Cloning Machine

Collars are the consumable part of a cloner, and they wear. Resin and root hairs work into the neoprene over several cycles. Most growers run a pack through two or three rounds, then swap rather than scrub. A torn slit lets the stem drop, and a dropped stem misses the spray pattern. Keeping a spare pack on the shelf costs less than losing a tray of cuttings. The slit closes around the stem, which also blocks light from reaching the reservoir. That matters because light in the reservoir is how algae starts. Check each collar as you load it and set aside any that have gone slack. It takes a minute and saves a week.

Key Features

• Pack Quantity: 35 collars
• Collar Size: 2 in neoprene disc
• Hard Density: the stiffer of the two EZ-CLONE neoprene options
• Stem Support: holds cuttings upright with foliage above the lid
• Sterile Out of the Pack: no soak or rinse before the first run
• Reservoir Shade: the closed slit blocks light that would otherwise feed algae
• Other Counts: the same collar is listed in 17, 65 and 280 packs

Technical Specifications