Psycloner Pro 35 Site Aeroponic Cloning Machine with Humidity Dome

Psycloner Pro 35 Site: Aeroponic Cloning on a Shelf

This aeroponic cloner holds 35 cuttings in a footprint small enough for a shelf, a tent corner or a counter. Each cutting sits in a 1.625 in neoprene insert, with the bare stem hanging into the chamber below. A 360-degree spray manifold mists every stem, so roots form in air and water rather than in soil or plugs. DL Wholesale rates the system for rooted cuttings in 4 to 10 days. The manifold design is patent pending and runs from a smaller water pump. A smaller pump puts less heat into the reservoir water. The pump is UL-listed and sits inside a pre-filter housing that keeps debris out of the sprayers. Vents in the chamber move fresh oxygen in and warm air out, so no air pump is part of the setup. The body measures 16 x 11.5 x 9.5 in, small enough to lift and carry to the sink when full. Tray, lid and dome are molded from new ABS and PP plastic that is BPA-free. The kit arrives with the reservoir, lid, pump, manifold, dome and a full set of colored inserts. Add a light and water, and it is ready to run.

Running a Small Cloning Machine Day to Day

Pinch an insert open, slide the cut stem through, and let the neoprene close back around it. Keep one to two inches of stem below the insert so the mist reaches the cut. Thirty-five sites fill quickly, which keeps fresh cuttings out of the air for less time. The colored inserts make it easy to track several mother plants in one run. Set the humidity dome on once every site is loaded. Its adjustable flaps hold moisture high for fresh cuts and open up as roots start to show. That matters most in dry rooms, where leaves lose water faster than a rootless stem can draw it in. Plain, pH-adjusted water is the usual starting point, changed about once a week. Rinse the pre-filter between runs, since a clogged screen is the common cause of a weak spray. The dome is 8.5 in tall and adds roughly seven inches of height when it sits on the lid. Leave room for that clearance under a low-output fluorescent or LED panel. Worn inserts can be replaced with a separate collar pack, SKU 171400.

Key Features

• 35 cloning sites: A compact batch size for a shelf, tent or counter.
• 360-degree spray manifold: Mists every stem evenly from a pump that adds little heat.
• Filtered UL-listed pump: A pre-filter housing keeps debris out of the sprayers.
• No air pump needed: Chamber vents move oxygen in and warm air out.
• Foldable humidity dome: Adjustable flaps hold moisture high, then vent as roots form.
• Colored neoprene inserts: Track cuttings from different mother plants at a glance.

Technical Specifications