Skip to product information
1 of 2
Brand: Jump Start

Jump Start AccelaROOT 32-Cell Tray with Insert and Jumbo Starter Plugs

Jump Start AccelaROOT 32-Cell Tray with Insert and Jumbo Starter Plugs

SKU: SKU:JSAR32

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $23.77 USD
Regular price Sale price $23.77 USD
Sale Sold out
Shipping calculated at checkout.

The Jump Start AccelaROOT 32-Cell Tray is a complete starter kit with a tray, a 32-cell insert and 32 pre-moistened, pH-balanced plugs. The coir-based plugs root seeds or cuttings without rooting hormone and transplant straight into larger pots.

View full details

AccelaROOT 32-Cell Tray: Tray, Insert and Plugs Ready to Use

This kit arrives as three parts that work together: a tray, a 32-cell insert and 32 AccelaROOT plugs. Each plug sits in its own cell, so seeds or cuttings start in separate homes with no media to mix. The plugs are a coir-based blend held together with a binding agent. They come pre-moistened and pH-balanced, ready for planting out of the bag. Jump Start builds the blend with micro-air pockets that encourage dense feeder roots. Drainage is part of the design, which helps deter damping off in young seedlings. The air-to-water balance in the plug also makes overwatering less likely. Jump Start states that no rooting hormone is needed for cuttings. The plugs are jumbo-sized, with room to carry a cutting or seedling into early vegetative growth. When roots show, each plug lifts out of its cell and goes straight into a pot or garden bed. The tray and insert stay behind for the next round. Only fresh plugs are needed to start again.

Starting Seeds and Cuttings in Jumbo Starter Plugs

Set the insert in the tray and check that each plug sits level in its cell. For seeds, press one or two into the top of each plug at the depth listed on the seed packet. For cuttings, make a clean cut, open a hole in the plug with a pencil, and slide the stem in. Firm the media lightly so the stem stays upright. A humidity dome over the tray helps cuttings hold moisture until roots begin. Water from below by adding a little to the tray and letting the plugs draw it up. Let the surface dry slightly between waterings so roots keep reaching for air and moisture. Gentle light above the tray suits seedlings and fresh cuttings at this stage. Watch the bottom of the cells, where white root tips show that a plug is ready to move. Transplant the whole plug without pulling roots from the media. Rinse the tray and insert, then let them dry before the next batch. Thirty-two plugs make a useful run for a home grower filling a tent.

Key Features

  • Complete starter kit: Tray, 32-cell insert and 32 plugs in one box.
  • Coir-based plugs: A coir blend with binding agent holds its shape in the cell.
  • Pre-moistened and pH-balanced: Ready for seeds or cuttings straight from the pack.
  • Drainage that deters damping off: Micro-air pockets support dense feeder roots.
  • No rooting hormone needed: Jump Start rates the plugs for cuttings without it.
  • Reusable tray and insert: Transplant the plugs and refill the same tray.

Technical Specifications

Specification Value
Cells 32
Included Tray, 32-cell insert, 32 plugs
Plug media Coir-based blend with binding agent
Plug condition Pre-moistened, pH-balanced
Rooting hormone Not required
Use Seeds and cuttings through early vegetative growth
Manufacturer part number JSAR32
UPC 638104021203