AC Infinity 3x3 Grow Tent Kit, Advance AI System | 260W LED, 3 Plants

AC Infinity 3x3 Grow Tent Kit Built for an Even Square Canopy

Square tents light more evenly than long ones, and the 260W IONBOARD panel in this kit is cut to match. Its 640 full-spectrum diodes run at 2.7 µmol/J and peak at 1,702 PPFD in the center of the floor. The board measures 18.5 inches square, which leaves only a short reach out to each corner. White 3000K and 5000K diodes carry most of the output, with 660 nm red added for flowering. The CLOUDLAB 733 tent stands 35.43 x 35.43 x 70.86 inches on 22 mm steel poles rated for 250 lb. It ships with two hanging bars plus two extras, so the light, filter and fan each get their own support. Duct openings come in three sizes, four 4-inch, two 6-inch and three 8-inch, with rear and side intake vents. A wide viewing window gives a clear look at all three plants without opening the door. Exhaust is the 6-inch CLOUDLINE fan at 352 CFM and 34 dBA, working through a carbon filter rated for 410 CFM. A CLOUDRAY S6 clip fan oscillates across the canopy to keep air moving between the plants. The CONTROLLER AI+ runs every device and reads its built-in sensor plus a 12 ft probe. At full output the board pulls 2.30 A at 120V.

A 3x3 Grow Tent Complete Kit for Three Plants

Three plants fit the floor in a triangle, one pot toward the door and two along the back wall. Six 5-gallon fabric pots come in the kit, so a spare set is ready for transplanting. The trellis net covers the full square, which makes it easy to spread three canopies into one flat layer. Hang the board from the center bar and run it high and dim through the seedling weeks. As the plants fill in, most growers drop it toward the 12 to 18 inch range mapped on the PPFD chart. Put the filter and inline fan on one of the extra bars so they never crowd the light. AI mode watches how quickly heat and humidity build under the light, then pre-adjusts the exhaust ahead of the swing. Schedules stay on the controller, so a network outage never interrupts the light cycle. AC Infinity lists this kit as the 3x3 size of its Advance Grow Tent System. Three plants is the comfortable ceiling here. Packing in a fourth crowds airflow at the center of the canopy and invites humid pockets in late flower. Train the three you have wide and flat, and the light reaches more of each one.

Key Features

• 260W IONBOARD LED: A square board with full-spectrum diodes and 660 nm red, dimmable from the controller, sized to the 3x3 floor.
• CLOUDLAB 733 Tent: An Oxford shell with Mylar lining, 22 mm steel poles, two extra hanging bars and a tall viewing window.
• CLOUDLINE 6 Inline Fan: A ten-speed EC fan with the static pressure to pull steadily through a 6-inch carbon filter.
• 6-Inch Carbon Filter: Australian virgin RC412 carbon in a 38 mm bed keeps odors inside the tent.
• CLOUDRAY S6 Clip Fan: An oscillating clip fan with ten speeds strengthens stems and breaks up still air between plants.
• CONTROLLER AI+: Temperature, humidity and VPD control with Wi-Fi and Bluetooth, eight device ports and on-board program storage.
• Kit Accessories: Six 5-gallon fabric pots, a 3x3 trellis net, twist ties, 6-inch ducting, steel clamps, duct tape and hook and loop ties.

Technical Specifications