Air King 6 inch Clip Fan 2-Speed | 190 CFM, 12W, Steel Grill

Air King 6 Inch Clip Fan Puts 190 CFM on 12 Watts

Air King builds this one to an industrial standard rather than a household one. High runs 190 CFM at 2,020 RPM on 12W; low drops to 90 CFM at 1,740 RPM and 9W. The front grill is zinc-plated steel, not plastic, and the blade is chemical-resistant polypropylene. That combination is the reason it survives rooms that get sprayed weekly. It carries ETL and OSHA compliance and is made in the USA.

Where a Commercial Grade Clip On Fan Earns Its Keep

The spring-loaded clip and adjustable head put air exactly where a bench needs it. Clip it to a rack upright and aim down through a propagation tray. Or point it across a flood table to break up the wet layer on the media. A rear rotary switch means reaching behind the fan to change speed, which is mildly annoying on a crowded shelf. It runs at 34 dBA on low, quiet enough for a room you work in. It does not oscillate, so treat it as a spot fan and not room circulation. At 2.1 lbs the steel grill gives it real heft for its size.

Key Features

• 190 / 90 CFM, Two Speeds: A genuine low for seedlings and a high that still moves a bench.
• 12W on High: Nine watts on low, so leaving it running costs almost nothing.
• Zinc-Plated Steel Front Grill: Holds up in spray rooms where plastic grills go brittle.
• Polypropylene Blade: Chemical resistant, so foliar residue wipes off instead of etching.
• Spring-Loaded Clip, Adjustable Head: Grips rack uprights and bench edges, then aims and holds.
• ETL and OSHA Compliant: Rated for commercial workspaces, not just household use.
• 34 dBA on Low: Quiet enough to leave running in a room you work in daily.

Technical Specifications