
Anden Movable Dehumidifier 130 Pints/Day, Built to Follow the Moisture
Casters are the whole point of the A130F, the rolling member of Anden's commercial A130 series. It is a refrigerant dehumidifier that removes 130 pints per day at 80°F and 60% RH, then moves to wherever the next wet room is. Power comes from a standard 120V outlet, with a draw of 8.3 amps and 920 watts under rated conditions. Efficiency is 2.8 L/kWh, which equals about 5.9 pints of water per kilowatt-hour. Noise sits at 50 dBA, so it can run beside a crew working the canopy. The cabinet measures 19-1/2 inches wide and 30-1/16 inches long, standing 21 inches tall on its casters. It weighs 114 lb, which is why the wheels and built-in handles matter so much. Room air enters directly, crosses a MERV 11 disposable filter, and leaves from the end of the cabinet. Dehumidifying works on inlet air from 50°F to 104°F, down to a 40°F dew point. Plan for about 3,310 BTU/h of added heat wherever it parks.
A Portable Dehumidifier for Rooms That Change Every Week
Facilities that run staggered harvests get the most from it. Park it in flower during the last weeks of bloom, then roll it into the drying room the day the plants come down. Between rotations it can sit in a veg room or a clone area that tends to run humid after watering. Set it near a floor drain and run the included tubing, so condensate leaves without anyone emptying a bucket. The onboard digital control sits on top of the cabinet and holds the room at your set point. For readings at canopy height, the optional A77 remote or any dry contact controller can take over. It also hangs from Anden's hanging kit when a room needs the floor space back. The honest limit is ducting, because this model has no inlet or outlet collars and cannot join a duct run. Treat it as a room unit that cleans and dries the air around it. Check the filter every few weeks during heavy use, since a loaded filter cuts airflow and capacity together. The five-year warranty covers all parts, refrigeration system included.
Key Features
- Casters and Built-In Handles: The cabinet rolls across a flat floor, so one unit can cover several rooms through a harvest cycle.
- Room-Air Operation: Air is drawn straight from the space and discharged from the end, with nothing to install beyond a drain line.
- Top-Mounted Digital Control: The display sits on top for easy reach, and the optional A77 remote can run it from canopy height.
- MERV 11 Filtration: The disposable filter keeps dust, leaf litter and trim debris off the coil, protecting capacity between changes.
- Corrosion-Resistant Aluminum Coil: The coil holds up to the wet, nutrient-laden air that grow rooms and drying rooms produce.
- Insulated Cabinet: Half-inch EPS insulation cuts sweating on the shell and keeps running noise down.
- Five-Year Warranty: Coverage runs to every part, including the sealed refrigeration system.
Technical Specifications
| Specification | Value |
|---|---|
| Model | A130F (movable, with casters) |
| Water removal | 130 pints/day at 80°F / 60% RH (AHAM DH-1 2008) |
| Energy factor | 2.8 L/kWh (5.9 pints/kWh) |
| Electrical | 120VAC, 1 phase, 60 Hz |
| Current draw | 8.3 A |
| Power | 920 W |
| Total cooling load | 3,310 BTU/h |
| Noise | 50 dBA |
| Cabinet dimensions | 19-1/2 in W x 18-3/4 in H (21 in with casters) x 30-1/16 in L |
| Weight | 114 lb |
| Dehumidifying range | 50–104°F inlet air, 40°F dew point minimum |
| Ventilation range | 40–140°F, 0–99% RH non-condensing |
| Control mounting | Top |
| Optional control | Anden A77 remote control |
| Air discharge | End |
| Filter | MERV 11, disposable |
| Refrigerant | R410A |
| Coil | Corrosion-resistant aluminum |
| Cabinet insulation | 1/2 in EPS |
| Discharge air temperature rise | 10–30°F |
| Drain connection | 3/4 in MNPT |
| Included | 3/4 in MPT x 3/4 in barbed fitting, 10 ft of 3/4 in ID drain tubing |
| Power cord | 8 ft, plug type |
| Warranty | 5 years, all parts including refrigeration system |
| UPC | 686720187094 |