Anden Industrial Dehumidifier 130 Pints/Day, Model A130 | 120V

Anden Industrial Dehumidifier 130 Pints/Day for Automated Facilities

Facilities that run several rooms on one control plan need a dehumidifier that talks to the rest of the system. Anden's Model A130 in its ducted industrial build is a refrigerant dehumidifier rated at 130 pints per day at 80°F and 60% RH. It runs on 120V single-phase power, drawing 8.3 amps and 920 watts during rated operation. Rated efficiency is 2.8 L/kWh, so every kilowatt-hour returns close to six pints of water. Airflow enters and leaves through 10-inch collars, and a backdraft damper on the outlet keeps ducted runs from reversing. The cabinet is 19-1/2 x 18-3/4 x 30-1/16 inches and weighs 113 lb. Running noise sits at 50 dBA. A MERV 11 disposable filter protects a corrosion-resistant aluminum coil running R410A refrigerant. Inlet air from 50°F to 104°F keeps it dehumidifying, and the fan alone runs in air up to 140°F. Expect about 3,310 BTU/h of added heat to factor into the cooling load.

Commercial-Grade Dehumidifier Control for Multiple Zones

The built-in control can be set up for dehumidification and ventilation, or for zoning across separate spaces. Wi-Fi thermostats in Anden's 8820, 8830 and 8840 range send humidity and temperature alerts to a phone or tablet. For bigger rooms, the 8082 sensor reads conditions in several locations and averages them, so one damp corner does not drive the whole room. The 8083 module mounts flush and averages multiple temperature and humidity points as well. If a facility prefers its own controller, a dry contact closure will run the unit just as easily. Mechanically, it hangs from Anden's hanging kit, sits on a platform or ducts in from a mechanical room. Ducted installs keep the compressor heat and noise away from the canopy, which matters in tight flower rooms. Growers often run it in ventilation mode after lights-off to keep air moving through dense canopy. The trade-off is setup time, since zoning and sensor averaging take planning before the first crop goes in. Change the filter on a schedule, because a loaded filter quietly cuts capacity in every zone it serves. The five-year warranty covers all parts, refrigeration system included.

Key Features

• Dehumidify, Ventilate or Zone: The onboard control runs dehumidification with ventilation, or splits control across zones in a multi-room layout.
• Wi-Fi Thermostat Compatible: Anden 8820, 8830 and 8840 thermostats send humidity and temperature alerts to a phone around the clock.
• Multi-Point Sensor Averaging: The 8082 and 8083 sensors average readings from several spots, steadying control in large or uneven rooms.
• Ductable With Backdraft Damper: Collars at both ends and an outlet damper let it serve a room from a mechanical space.
• MERV 11 and Aluminum Coil: The disposable filter keeps debris off a corrosion-resistant coil built for wet, nutrient-laden air.
• Five-Year Warranty: Coverage includes every part, the sealed refrigeration system among them.

Technical Specifications