
Anden Industrial Dehumidifier 95 Pints/Day in a Ducted Cabinet
A ducted dehumidifier earns its keep in rooms where floor space is already spoken for. The Anden A95 is that kind of unit, a commercial refrigerant dehumidifier rated at 95 pints per day at 80°F and 60% RH. It plugs into a standard 120V outlet, drawing 8.0 amps and 905 watts at rated conditions. Efficiency is 2.1 L/kWh, about 4.4 pints of water for each kilowatt-hour. Air moves through 10-inch inlet and outlet collars, and a backdraft damper sits on the outlet side. Discharge can leave from the top or the end, and the control head swaps between top and front in the field. The cabinet measures 12-1/2 x 14-1/2 x 27-1/2 inches and weighs 70 lb. Ducted, it runs at about 54 dBA. A MERV 11 disposable filter protects a corrosion-resistant aluminum coil running R410A. Dehumidification continues on inlet air from 50°F to 104°F, and the unit adds roughly 3,040 BTU/h of heat.
Installing the A95 Dehumidifier Overhead or Next Door
Hanging it from the ceiling keeps benches and carts moving freely underneath. Ducting it from a closet or hallway takes the compressor noise and heat out of the room entirely. Return air comes in through one collar and dry air goes back through the other, which also stirs CO2 and evens out temperature. Choose top or end discharge to match the duct path, and flip the control to whichever face stays reachable. The built-in control can run dehumidification with ventilation, or it can be set up for zoning. Anden's A77 remote, Wi-Fi thermostats or any dry-contact controller can take over for canopy-height readings. Keep duct runs short with few bends, since added static pressure costs both airflow and capacity. The damper earns its place here, stopping air from drifting backward through the duct when the unit cycles off. The replacement filter is the Anden 5771, and it comes out tool-free once it looks gray. The trade-off is capacity, because a large flower room will need more than one unit this size. The five-year warranty covers all parts, refrigeration system included.
Key Features
- Ducted With Backdraft Damper: Inlet and outlet collars take flex duct or hard pipe, and the outlet damper stops reverse airflow at idle.
- Top or End Discharge: Two discharge options and a field-swappable control head adapt the cabinet to tight ceilings and closets.
- Dehumidify, Ventilate or Zone: The onboard control circulates air between cycles or splits control across separate zones.
- Remote and Wi-Fi Ready: The A77 remote, Anden Wi-Fi thermostats or a dry-contact controller move control to canopy height.
- MERV 11 Filtration: The disposable filter keeps debris off the coil; the Anden 5771 is the replacement.
- Five-Year Warranty: Coverage includes every part, the sealed refrigeration system among them.
Technical Specifications
| Specification | Value |
|---|---|
| Model | A95 (ducted) |
| Water removal | 95 pints/day at 80°F / 60% RH (AHAM DH-1 2008) |
| Energy factor | 2.1 L/kWh (4.4 pints/kWh) |
| Electrical | 120VAC, 1 phase, 60 Hz |
| Current draw | 8.0 A |
| Power | 905 W |
| Total cooling load | 3,040 BTU/h |
| Noise | 54 dBA ducted |
| Cabinet dimensions | 12-1/2 in W x 14-1/2 in H x 27-1/2 in L |
| Weight | 70 lb |
| Dehumidifying range | 50–104°F inlet air, 40°F dew point minimum |
| Ventilation range | 40–140°F, 0–99% RH non-condensing |
| Control | Built-in digital control, field-interchangeable top or front; dehumidification and ventilation or zoning |
| Optional controls | Anden A77 remote control; Anden 8082 temperature/RH sensor; Wi-Fi thermostats 8820, 8830, 8840; 8083 sensor module |
| Air discharge | Top or end |
| Duct collars | 10 in inlet and outlet, backdraft damper at outlet |
| Filter | MERV 11, disposable (replacement Anden 5771) |
| Refrigerant | R410A |
| Coil | Corrosion-resistant aluminum |
| Cabinet insulation | 1/2 in EPS |
| Drain connection | 3/4 in MNPT |
| Power cord | 8 ft, plug type |
| Warranty | 5 years, all parts including refrigeration system |
| UPC | 686720185205 |