The Anden 5717 Filter, and the One Spec Anden Does Not Publish
This panel covers three machines: the A200V1, the A300V1 and the A300V3. Anden's installation manual for that family lists the filter as MERV 11 under part number 5717. One per unit, reached through a single filter access door. What the manual does not give is the panel's size, and Anden's accessory index does not carry it either. Other listings quote a figure. We are not going to repeat one we cannot trace back to Anden. A filter size that turns out to be wrong costs somebody a return and a week of running an unprotected coil. The part number is the reliable match here, and on these three machines it is the only match you need.
MERV 11 on an A200V1 or A300V1, and Two Intervals Worth Knowing
The media grade is the same one Anden uses across the dehumidifier line. The EPA holds MERV 11 to 65 percent or better capture from 1 to 3 microns, and 85 percent from 3 to 10. That is the band leaf dust, trimmed material and media grit travel in. Stopping it at the panel keeps it off the evaporator coil. A clean coil is a machine still making its rated pints rather than drawing full power against a blocked face. Timing is where this family is the odd one out. Anden tells growers to replace filters every 12 weeks or at the end of a harvest. The installation manual for the A200V1, A300V1 and A300V3 says the air filter should be replaced every six months after initial installation. Both figures come from Anden. A room that runs dusty should follow the shorter one.
Key Features
- Anden part 5717: The number to match for a single panel, which is how these are stocked
- Covers three machines: Anden's manual lists this filter for the A200V1, the A300V1 and the A300V3
- MERV 11 media: EPA holds the grade to 65 percent or better from 1 to 3 microns and 85 percent from 3 to 10
- No published size: Anden gives no filter dimensions for this part in the manual or the accessory index, so we do not quote one
- One filter per unit: The manual shows a single filter behind one access door on all three models
- Keeps the coil clean: A loaded face makes the unit draw full power for fewer pints, so fresh media is the simplest way to hold output
- Two intervals, both from Anden: The brand tells growers every 12 weeks or every harvest; the manual for this family says every six months after installation
Technical Specifications
| Specification | Value |
|---|---|
| Anden part number | 5717 |
| Filtration grade | MERV 11 |
| Size | Not published by Anden for this part |
| Filters per unit | 1 |
| Compatible models | Anden A200V1, Anden A300V1, Anden A300V3 |
| Replacement interval, Anden guidance | Every 12 weeks or at the end of a harvest |
| Replacement interval, family manual | Every 6 months after initial installation |
More on how Quest and Anden size their filters, what the MERV numbers mean and when each brand says to change them: Quest and Anden Filters: Sizes, Ratings and Replacement Timing.