Skip to product information
1 of 3
Brand: AutoPot USA

AutoPot 12Pot System - Twelve 3.9 Gal Pots + 60 Gal FlexiTank

AutoPot 12Pot System - Twelve 3.9 Gal Pots + 60 Gal FlexiTank

SKU: SKU:APWS003

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $646.19 USD
Regular price $646.19 USD Sale price $646.19 USD
Sale Sold out
Shipping calculated at checkout.

KILLER PRICE
This item is heavily discounted and may not qualify for discounts.

Availability: Online | Will Call Locations Stock May Vary

The AutoPot 12 Pot System waters twelve 3.9 gallon pots from a 60 gallon FlexiTank, with gravity doing the work of a pump. Twelve AQUAvalve5 trays fill on demand, so each plant gets a fresh feed only after it has drunk its tray dry.

View full details

What Comes in the AutoPot 12 Pot System

Twelve plants in three rows of four run from one large tank and a single set of taps. The heart of the kit is a 60 gal FlexiTank, a collapsible reservoir that stands about 25 in wide and 31.9 in tall when full. AutoPot sizes that volume to serve the twelve pots in this kit. Each of the twelve square pots holds 3.9 gal of mix and sits in its own grommeted tray with a lid. Inside every tray, an AQUAvalve5 lets solution in to a depth of about 1 in and then closes. It reopens only after the plant has emptied the tray, so roots see a wet phase followed by a dry one. Big plants cycle more often than small ones, and nothing floods in the process. No pump, timer or outlet is involved anywhere along the line. Twelve Root Control Discs come in the box, one for the base of each pot. The complete kit ships at around 35 lb before the tank is filled.

Running an Automatic Watering System Across Three Rows

An automatic watering system at this scale depends on a steady main line. A 1/2 in click-fit tank adaptor and filter sit at the FlexiTank outlet. From there, 26 ft of 1/2 in pipe runs the length of the room through two inline taps and a 1/2 in tee. Four reducing tees and four reducing crosses drop the feed into 19 ft of 3/8 in pipe for the tray connections. Keep the tank base at least 6 in higher than the highest valve, and set every tray level. Trays work best on a bench or board rather than straight on cold concrete. Pot up with an open mix, around half perlite or clay pebbles blended into coco or soil. Water each transplant in by hand, let it drain, and give the roots a week or more before the taps open. From then on, check the filter weekly and refill once the tank is down to about a third. With mineral feeds, open the flush taps for 30 seconds to a minute each week to clear residue. Twelve plants then feed themselves on their own schedules.

Key Features

  • Twelve pot sites: Twelve 3.9 gal square pots, twelve grommeted trays with lids and twelve Root Control Discs.
  • 60 gal FlexiTank: Collapsible reservoir, about 25 x 31.9 in when full, sized for twelve plants.
  • Three rows of four: Reducing tees and crosses split one main line into three tray rows.
  • 1/2 in main line: Click-fit tank adaptor and filter feed 26 ft of 1/2 in pipe.
  • 3/8 in tray feeds: 19 ft of 3/8 in pipe connects each AQUAvalve5 to the main.
  • Two inline taps: Close the feed for refills, filter checks or a flush.
  • Power-free operation: Gravity and twelve float valves replace pumps and timers.

Technical Specifications

Specification Value
Brand AutoPot
Model 12Pot System
SKU APWS003
Plant sites 12
Pot volume 3.9 gal (15 L), square
Pot size 10.2 in top x 11.8 in tall
Tray 1Pot grommeted tray with lid, 9.75 x 14 x 3 in
Reservoir 60 gal FlexiTank, collapsible
Reservoir size, filled 25 in diameter x 31.9 in tall
Valve AQUAvalve5 (12)
Main line 26 ft of 1/2 in pipe
Tray feed line 19 ft of 3/8 in pipe
Filter 1/2 in click-fit tank adaptor and filter
Fittings 2 inline taps, 1 tee (1/2 in), 4 tees and 4 crosses (1/2 to 3/8 in)
Root control 12 Root Control Discs
Layout 3 rows of 4
Minimum tank height 6 in above the highest valve
Power required None, gravity-fed
Kit weight 35 lb