B.LITE 1000W Premium DE HPS Fixture (120v-277v)

A Double Ended HPS Fixture With a Lay-Flat Profile

The B.Lite Premium fixture pairs a 1000W digital ballast with an open double ended reflector in one lay-flat housing. Its slim build lets growers hang the light closer to the ceiling and keep more vertical room for the canopy. The ballast accepts any input from 120V to 277V, so the same fixture fits residential circuits and commercial 277V lighting circuits. Power factor reaches 0.98 at full load, with total harmonic distortion held under 10%. Four onboard settings cover 600W, 750W, 1000W and a Super Lumen boost for the late flower push. The reflector uses ALMECO Vega and Alanod MIRO aluminum, two high-reflectance sheets chosen for even spread. An enlarged reflector shape pushes that light wider across the canopy. It runs a 1000W DE lamp in either HPS or MH, so one fixture can serve both the vegetative and flowering stages. The lamp is sold separately, which lets you match the bulb to the crop and the room. Smart Start ignition, soft start and hot lamp re-strike protect the lamp each time it fires.

Running a 1000W DE Fixture From the Master Zone Controller

Hang the fixture level, then seat the lamp with clean gloves so skin oils never touch the quartz. Plug the RJ14 connection kit into the control port and run the cable to the next fixture in the row. With the B.Lite Master Zone Controller, the whole room dims together anywhere from zero to full power. Without the controller, the dial on each ballast sets its own output. Many growers start a new crop at the lowest setting and step up as plants fill in. Automatic frequency adjustment keeps the lamp stable as the line voltage shifts. Full circuit protection guards against faults, and RF shielding keeps the ballast from disturbing nearby electronics. Keep the room between freezing and 35 degrees C, with humidity from 25 to 70 percent. Check the reflector between crops and wipe away dust with a soft, dry cloth. A clean reflector and a fresh lamp keep light levels where you set them.

Key Features

• 120V-277V Input: One fixture works on standard and commercial circuits.
• Four Power Settings: 600W, 750W, 1000W and Super Lumen on the ballast dial.
• Zone Control Ready: 0-1000W dimming with the B.Lite Master Zone Controller via RJ14.
• Lay-Flat Design: Low profile saves vertical space in short rooms.
• Vega and MIRO Reflector: High-reflectance aluminum with an enlarged spread.
• Lamp Protection: Smart Start ignition, soft start and hot lamp re-strike.

Technical Specifications