B.LITE Under Canopy Lights Dual Channel Daisy Chain Cable

A Dual Channel Daisy Chain Cable for Under Canopy Runs

Under canopy lights work best when a whole row can be linked and controlled as one chain. This B.Lite cable carries a dual channel connection from one fixture to the next. It is built for B.Lite under canopy light runs that use two channels. Threaded connectors at each end screw onto their mates and lock in place. A tough black jacket protects the conductors from the daily wear of a working bench. Three lengths cover close fixtures, long benches and wide aisles. The shortest keeps tightly spaced lights neat with little slack. The longer cables reach across walkways or between separate benches. Matching the length to each gap keeps cable off the floor. All lengths share the same connectors, so they mix within one run.

Laying Out an Under Canopy Lighting Cord Run

Measure the distance between each pair of fixtures before choosing lengths. Use the shortest cable that spans each gap without strain. Mount the lights first, then connect from the first fixture outward. Turn each connector until it seats fully so the joint holds tight. Tie loose cable to the bench frame, clear of drip lines and standing water. Run cables along rails and posts instead of across walkways. Check the light's manual for the most fixtures allowed on one chain. Cut power before connecting or separating any joint. Look over the jackets and connectors between crops for cuts, crushing or corrosion. Swap out any damaged cable before powering the run again.

Key Features

• Dual Channel: Links B.Lite under canopy lights on two channels.
• Threaded Connectors: Screw-lock joints at both ends.
• Three Lengths: 3 ft, 6 ft and 15 ft options.
• Heavy Jacket: Tough black outer jacket for bench use.
• One Continuous Run: Keeps a row of lights on a single chain.
• Mix and Match: All lengths share the same connectors.

Technical Specifications