B.LITE Under Canopy Lights Single Channel Daisy Chain Cable

A Single Channel Daisy Chain Cable for Under Canopy Lights

Linking under canopy lights end to end keeps a whole row on one connection instead of a tangle of separate cords. This B.Lite cable joins one fixture to the next so the run behaves as a single chain. It is a single channel cable, built for B.Lite under canopy light runs on one channel. Each end carries a threaded connector that screws onto its mate for a secure, locked joint. A heavy black jacket protects the conductors from the wear of a working bench. Three lengths cover different gaps between fixtures. The shortest bridges lights that sit close together along a bench. Longer cables cross aisles, jump between benches or reach a fixture at the far end of a table. Choosing the right length keeps slack off the floor and away from foot traffic. Every length uses the same connectors, so they mix freely within one run.

Routing Under Canopy Light Cable Through a Grow Room

Plan the layout before hanging anything, measuring the distance between each pair of fixtures. Pick the shortest cable that spans each gap without pulling tight. Hang the lights first, then connect the cables from the first fixture outward. Thread each connector fully until it seats, so the joint stays tight under vibration. Secure loose lengths to the bench frame with ties, keeping them clear of drip lines and puddles. Route cables along trellis posts or rails rather than across walkways. Follow the light's manual for the most fixtures allowed on one chain. Switch off power before connecting or separating any joint. Inspect jackets and connectors between crops for cuts, crushing or corrosion. Replace any damaged cable before the next run goes live.

Key Features

• Single Channel: Links B.Lite under canopy lights on one channel.
• Threaded Connectors: Screw-lock joints at both ends.
• Three Lengths: 3 ft, 6 ft and 15 ft options.
• Heavy Jacket: Tough black outer jacket for bench use.
• One Continuous Run: Keeps a row of lights on a single chain.
• Mix and Match: All lengths share the same connectors.

Technical Specifications