
MilStop SP Foliar Fungicide in the Commercial 25 lb Bag
This BioWorks soluble powder is 85% potassium bicarbonate, with surfactants already blended into the remaining 15%. Dissolved and sprayed, it pulls water out of fungal spores and hyphae on contact. That dehydration is the curative action against powdery mildew already on the leaf. The dried spray also leaves the leaf surface mildly alkaline, which makes it hard for new spores to germinate. Beyond powdery mildew, the label covers Botrytis gray mold and blight, Alternaria, anthracnose and black spot. Cercospora, Corynespora and Septoria leaf spots, Phomopsis blight and scab are listed too. BioWorks notes no known resistance, so it can hold the contact role in a rotation year after year. Re-entry is 1 hour under the Worker Protection Standard. Sprays can go on up to and including the day of harvest. It is OMRI Listed for organic production and carries a Caution signal word. The 25 lb bag suits greenhouse ranges spraying every week or two through a long mildew season. At the common greenhouse rate it makes roughly 1,000 gallons of finished spray.
Mixing and Timing a Powdery Mildew Fungicide
A powdery mildew fungicide that works on contact only protects what it wets. Greenhouse rates run 1.25 to 5 lb per 100 gal of water, depending on disease pressure. BioWorks suggests 2.5 lb per 100 gal for routine preventative work. In the field the label allows 2 to 5 lb per acre, with no more than 5 lb in one application. Fill the tank halfway, start agitation, then add the powder slowly before topping up. Leave the pH alone once it is mixed, because acidifying the solution weakens it. It needs no added surfactant or wetting agent. Skip tank partners that do not tolerate a mildly alkaline solution. Start at the first sign of disease and repeat every one to two weeks while conditions favor it. Shorten the interval in wet weather or during fast growth. On sensitive crops, spray a test area first and watch it for 14 days. Never run it through irrigation lines or apply it as a soil drench. Mix only what the crew will spray that day, and keep the bag sealed away from moisture.
Key Features
- 85% Potassium Bicarbonate: Contact action that dries out fungal spores and hyphae.
- Curative on Powdery Mildew: Kills mildew already growing on the leaf surface.
- Preventative Residual: An alkaline leaf surface discourages new infections.
- Pre-Formulated: Surfactants are included, so no wetting agent is needed.
- 1-Hour REI, 0-Day PHI: Crews return quickly, and sprays can continue to harvest day.
- OMRI Listed: Approved for organic production.
- No Known Resistance: Holds the contact role in a fungicide rotation.
- 25 lb Bag: Makes about 1,000 gallons at 2.5 lb per 100 gal.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | BioWorks, Inc. |
| Part number | 1M112B06 |
| Active ingredient | Potassium bicarbonate, 85.00% |
| Other ingredients | 15.00% |
| Formulation | Soluble powder, pre-formulated with surfactants |
| Net weight | 25 lb |
| EPA Reg. No. | 68539-13 |
| Signal word | Caution |
| Restricted-entry interval | 1 hour |
| Pre-harvest interval | 0 days |
| Greenhouse rate | 1.25 to 5.0 lb per 100 gal |
| Greenhouse area limit | 1.15 lb per 10,000 sq ft per application |
| Field rate | 2.0 to 5.0 lb per acre |
| Spray interval | Every 1 to 2 weeks |
| Irrigation or drench use | Not permitted |
| Certification | OMRI Listed |
| MPS code | 4602/Green |
| Shelf life | 2+ years at 70 to 75 °F |