Bluelab Carry Case That Doubles as a Work Station
A handheld meter lives a hard life, carried room to room, set on wet benches and knocked off reservoir lids. This is Bluelab's own carry case, cut to fit their handheld meters closely enough that the display stays readable while the meter sits inside. It fits the Bluelab Combo Meter, the Combo Meter Plus and the Multimedia pH Meter. It also takes Bluelab's pH and conductivity pens, plus 20 ml solution sachets for calibration on the go. A firm outer shell absorbs knocks and drops that would otherwise land on the meter. Inside, a netted pocket and strap hold the meter in place. Two custom pockets in the lid take the probes, and an internal strap keeps the cables coiled out of the way. The adjustable nylon strap goes over a shoulder or hangs from a wall hook, and it can be removed. A D-hook on top lets the case hang from a nail or rail beside the reservoir. The zip closure seals everything in for storage or the drive between sites. The meter, probes and sachets are not included.
Daily Use of a Meter Carry Case in the Grow
Most growers hang the case right beside the nutrient tank and leave the meter in it during checks. Open the lid, drop only the probes into the solution and read the display without lifting anything out. That keeps the electronics clear of splashes, which is where most handheld meters fail early. Between readings, rinse the probes and slide them back into their pockets so the tips are protected. Dry probes store best in the case, so shake off excess water before closing the zip. For consultants and techs working several rooms or sites, the shoulder strap leaves both hands free for ladders and lids. Keep a couple of calibration sachets in the case so a quick calibration can happen wherever a reading looks off. The case also makes it harder to lose the small parts, from storage caps to spare sachets. The honest limit is that it protects against bumps and splashes, not submersion, so it should never go into a reservoir. It is a simple accessory that pays for itself the first time a meter slips. Bluelab backs it with a two-year limited guarantee.
Key Features
- Firm Outer Shell: The rigid casing takes knocks and drops so the meter inside does not.
- Read Without Removing: The meter sits in a netted pocket with its display visible, so only the probes leave the case.
- Custom Probe Pockets: Two pockets in the lid protect probe tips, and an internal strap tidies the cables.
- Strap and D-Hook: An adjustable, removable nylon strap and a top D-hook let the case hang by the tank or ride on a shoulder.
- Fits Bluelab Handhelds: Sized for the Combo Meter, Combo Meter Plus, Multimedia pH Meter, pH and conductivity pens and 20 ml sachets.
Technical Specifications
| Specification | Value |
|---|---|
| Compatible meters | Bluelab Combo Meter, Combo Meter Plus, Multimedia pH Meter, pH Pen, Conductivity Pen |
| Also holds | 20 ml Bluelab solution sachets |
| Outer case | Firm shell, zip closure |
| Interior | Netted meter pocket with strap, two probe pockets, internal cable strap |
| Carry options | Adjustable, removable nylon strap; D-hook for hanging |
| Meter included | No |
| Warranty | 2-year limited |