The Can-Fan Max-Fan 14-inch inline fan moves up to 1,700 CFM through 14" duct on an efficient mixed-flow impeller that stays quieter than most fans its size. This grow room exhaust fan is pre-wired with an 8-foot 120V cord, is fully speed-controllable, and carries a thermally protected motor with a 5-year warranty.
Can-Fan Max-Fan 14-Inch Inline Fan for High-Volume Grow Rooms
The Can-Fan Max-Fan 14-inch inline fan pushes up to 1,700 CFM at 1,700 RPM through 14-inch duct, using a mixed-flow impeller in a galvanized housing to move big air more efficiently and quietly than older centrifugal blowers. It draws just 2.1 A and 253 W max on 120V, and measures 15.75" long for a compact inline footprint. That airflow suits large sealed rooms, multi-light tents, and long duct runs with a carbon filter inline.
Speed-Controllable Grow Room Exhaust Fan
Growers typically run this grow room exhaust fan pulling through a matched carbon filter, then trim it with a compatible speed controller to balance airflow against noise for the dark cycle — just keep it at 40% or higher so the motor doesn't overheat. It arrives pre-wired with an 8-foot 120V cord for plug-and-play setup into ducting and tent exhaust, and a thermally protected motor guards against overheating. A 5-year warranty backs the long-run reliability sealed rooms depend on.
Key Features
- 1,700 CFM mixed-flow airflow: Moves big air for large sealed rooms, multi-light tents, and filtered duct runs.
- Efficient, quiet design: The mixed-flow impeller runs more efficiently and quietly than older centrifugal blowers of the same size.
- Low power draw: Pulls just 253 W max and 2.1 A on standard 120V.
- Speed controllable: Works with compatible controllers to dial airflow and noise; keep at 40% or higher to avoid overheating.
- Pre-wired 8' cord: Plug-and-play into ducting, carbon filters, and tent exhaust systems.
- Thermal protection, 5-year warranty: A thermally protected motor and long warranty back continuous-duty reliability.
Specifications
| Spec | Value |
|---|---|
| Airflow | 1,700 CFM @ 0 in wg |
| Fan Speed | 1,700 RPM |
| Duct / Inlet-Outlet | 14 in |
| Max Watts | 253 W |
| Amps | 2.1 A @ 120V, 60 Hz |
| Length | 15.75 in |
| Blade Design | Mixed flow |
| Housing | Galvanized steel |
| Noise | 10 sones @ 0.10 in wg |
| Power Cord | Pre-wired 8 ft, 120V |
| Warranty | 5 Years |