CenturionPro Mini Dry Tumbler | Quantanium 1/4 in, 304 Stainless

Where the CenturionPro Mini Dry Tumbler Fits

One machine takes it: the Mini. CenturionPro builds a separate 30 in barrel for the Original, Silver Bullet and Gladiator, so the two do not swap. This one runs 6.5 in across in 16 gauge 304 stainless, with the 1/4 in slot pattern cut for material trimmed after drying. The Mini itself moves about 7 lbs an hour dry, and 35 wet.

What the Quantanium Coating Changes at the Barrel

Resin is the reason it is there. Quantanium is a PPG non-stick, an internally reinforced PTFE film run 0.0010 to 0.0015 in thick, formulated without PFOA and rated FDA conforming. CenturionPro puts trichome retention 40% higher than an uncoated barrel and says no spray or oil is needed to get there. In practice that is a wipe with warm water between runs instead of a stop to scrape. Two cautions. Never pressure wash it, because the coating flakes off; soak it in warm soapy water and wipe with a soft cloth. And the 10 year term CenturionPro puts on its machines excludes consumable parts, tumblers among them. Run the barrel 40 to 50% full, with flower 80 to 90% dry and the leaf still pliable.

Key Features

• Fits the Mini alone: The Original, Silver Bullet and Gladiator take a longer 30 in barrel.
• 1/4 in slot, dry build: The slot pattern CenturionPro cut for material trimmed after drying.
• 16 gauge 304 stainless: The substrate under the coating, at 6.5 in across the barrel.
• Quantanium non-stick: A PPG reinforced PTFE film, PFOA free and rated FDA conforming.
• 40% more trichome kept: CenturionPro's figure against a bare barrel, with no spray or oil.
• Wipe it, never pressure wash: Warm soapy water and a soft cloth. Pressure lifts the coating.
• Outside the 10 year term: That warranty covers machines. Tumblers count as consumable parts.

Technical Specifications