CenturionPro Quantanium Dry Tumbler | 30 in, 1/4 in Slot

Which Machines Take the CenturionPro Quantanium Dry Tumbler

Three of them: the Original, the Silver Bullet and the Gladiator. All three run the 30 in barrel. The Mini takes a shorter 28 in part, so the two do not swap, whatever a spec sheet says. Under the coating is 16 gauge 304 stainless at 6.5 in across, with the 1/4 in slot pattern. Nothing else in the line uses it.

Sizing a Replacement Tumbler Barrel for a Gladiator

Count them first. The Original and the Silver Bullet run one barrel each. The Gladiator runs two side by side, so a full spare set there is two of these rather than one. Throughput follows the machine, not the part. The Original and Silver Bullet move 50 lbs an hour wet and 10 dry. The Gladiator does 75 and 15. Each barrel is hand made, and blade alignment sometimes wants a small calibration on first fit. Two things worth knowing before it ships. CenturionPro moved to a dual purpose hybrid build in 2020 and now points most rooms at that instead. This dry only barrel is made to request. And its 10 year machine term does not reach tumblers, which are consumables.

Key Features

• Fits three machines: Original, Silver Bullet and Gladiator, all on the 30 in barrel.
• Not a Mini part: The Mini runs a shorter 28 in barrel. The two are not interchangeable.
• A Gladiator needs two: It runs a pair side by side, so one barrel is half a spare set.
• 1/4 in slot, dry build: The slot pattern CenturionPro cut for material trimmed after drying.
• Quantanium on 304 stainless: A PPG reinforced PTFE film, PFOA free and rated FDA conforming.
• Hand made, so check alignment: Blade clearance can want a small calibration on first fit.
• Hybrid is the current build: CenturionPro points most rooms at the dual purpose barrel now.

Technical Specifications