
Kief Tumbler for the CenturionPro DBT2
This accessory turns the CenturionPro DBT2 dry batch trimmer into a dry sifter between trimming runs. It is a complete replacement tumbler wrapped in 150 micron mesh made of medical-grade stainless steel. After a batch trim, the finished flower comes out and this tumbler goes in where the standard drum sat. Trim from the collection bin then runs through it, and resin heads pass through the mesh. CenturionPro describes the result as two machines in one. Nothing from the harvest has to go to waste, since the sugar leaf gets a second job. The tumbler runs on the DBT2's own motor and drive, so no separate power unit is needed. It is built only for the DBT Model 2 and does not fit the other DBT models. The 150 micron screen sits in the middle of the range CenturionPro offers. Finer screens give a purer sift, while coarser ones move faster with more plant material. This grade balances yield and cleanliness for most dry trim.
Using a Kief Filter Screen After a Dry Trim
Unplug the trimmer and stand it vertical before the swap. Loosen and remove the blade sheet and the standard tumbler, then slide the filter screen in and turn it counter-clockwise to lock. Fill the screen one half to three quarters full with dry trim and fit the tumbler lid. Overfilling lowers both quality and processing speed. Rotate the trimmer back to horizontal, switch it on and run for up to 10 minutes. To split grades, run five minutes, collect the first batch, then run five more. Dry ice speeds the separation when it is in pellets or finely crushed. CenturionPro suggests roughly 70 to 80 percent trim with 20 to 30 percent dry ice. Give the mix 5 to 10 minutes to get properly cold before running. Large chunks of dry ice can damage the screen. When output starts to drop, hand clean the mesh with soap and hot water. Sifted kief works for hand pressing, as a topping for flower, or as rosin press stock.
Key Features
- 150 Micron Screen: A middle grade that balances kief purity and yield.
- Medical-Grade Stainless Mesh: Stainless steel screen holds up to repeated sifting and cleaning.
- Swaps Into the DBT2: Replaces the standard tumbler after a batch trim.
- Uses the DBT2 Drive: Runs on the trimmer's own motor, with no separate power unit.
- Dry Ice Ready: Accepts pellet or finely crushed dry ice for faster, colder separation.
- Second Use for Trim: Turns leftover sugar leaf into collected kief.
- Simple Cleaning: Hand washes with soap and hot water when output starts to drop.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | CenturionPro Solutions |
| Model | CP-17001 |
| Screen size | 150 micron |
| Screen material | Medical-grade stainless steel mesh |
| Compatible machine | CenturionPro DBT Model 2 |
| Drive | Runs on the DBT2 motor and drive |
| Run time | Up to 10 minutes per load |
| Fill level | 1/2 to 3/4 of the screen |