HP1 Bucker: Compact Powerhouse
The HP1 Bucker is a testament to efficiency and convenience. It features a bucker stand and table-top setup legs for versatility. With five hole sizes, it accepts stems up to 3/4” and can process up to 175 lbs wet or 35 lbs dry per hour, effectively replacing 5-7 human workers. The 0.75 HP gear-driven motor with variable speeds ensures power and adaptability for both wet and dry products. Constructed from stainless steel and anodized aluminum, it is both sturdy and easy to clean. The HP1 plugs into a standard 110-volt, 15-amp circuit and is EU/AUS compatible.
HP3 Triple Bucker: Industrial Efficiency
The HP3 Triple Bucker, a multi-operator, industrial de-stemming machine, is designed for large-scale operations. It requires three operators for optimal efficiency, and each station is equipped with five different-sized holes to enhance processing capacity. Capable of handling up to 500 lbs wet or 100 lbs dry per hour, it is the ultimate solution for high-volume harvesting. The HP3 includes three 0.75 HP gear-driven motors with variable speed controls for maximum power and adjustability. Like the HP1, it's made from durable materials and is easy to set up and maintain. It connects to a 110-volt, 20-amp circuit and is also EU/AUS compatible.
HP1 SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 2.5A Operating
Dimensions: 24”³ L x 18”³ W x 22”³ H
Weight: 100lbs
Drive Motor: 0.75 hp, IP54 | 1690 RPM
Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V
Human Worker Replacement: 5-7 people
Feed Throughput: Wet: 175+ lbs/hr | Dry: 35+ lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s
Pull Strength: > 400 lbs
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 2 years
(Stand included)
HP3 SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 7.5A Operating
Dimensions: 85”³ L x 32”³ W x 51”³ H
Weight: 500lbs
Drive Motor: 0.75 hp, IP54 (x3) | 1690 RPM (x3)
Circuit Breaker Required: NA: 20A/120V | EU, AUS: 20A/220V
Human Worker Replacement: 15-21 people
Feed Throughput: Wet: 500+ lbs/hr | Dry: 100+ lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s (x3)
Pull Strength: > 400 lbs (x3)
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 2 years
(Stand included)
