
A Small Batch Trimming Machine That Grows With the Room
One perpetual flower room rarely fills a large trimmer, but it will bury a crew. The Mini SS sits in that gap with a single tumbler measuring 6.25 in across and 27 in long. Wet material runs at up to 35 lbs per hour, and dry at about 7 lbs. The reel turns anywhere from 3,500 to 35,000 cuts per minute. That range is the point. Dense indoor flower wants a slower pass than airy outdoor. Growers set the dial once per strain and leave it alone for the rest of the batch. The machine draws 6 Amp on a standard 110V circuit, so no electrician is needed. At 92 lbs it rolls on a cart between rooms without a forklift. Its footprint is 30 in long, which clears most doorways with room to spare.
Why a GMP Compliant Bud Trimmer Matters at Audit Time
Inspectors do not care how fast a machine runs. They care what touches the flower and how you prove it gets clean. Every wetted surface here is 304 stainless or electroless nickel plated aluminum. The cutting reel is nitrided, a hardening process that leaves no coating to flake into a batch. Bearings are food-grade stainless and sealed twice over, which removes grease from the conversation entirely. The hopper is food-grade plastic and lifts out for washing. Wet trimming builds resin fast, so plan a wipe-down roughly every half hour during a long session. Dry work stretches those intervals considerably. Rail kits connect two or three machines end to end when the operation scales past one room.

Key Features
- Single Tumbler: 6.25 in diameter and 27 in long, electropolished stainless
- Speed Control: 3,500 to 35,000 cuts per minute from one dial
- Throughput: up to 35 lbs of wet flower or 7 lbs of dry material per hour
- Construction: 304 stainless steel with electroless nickel plated aluminum body and lid
- Nitrided Reel: hardened steel with no coating that can flake into a batch
- Sealed Bearings: maintenance-free food-grade stainless in a double sealed chamber
- Standard Circuit: 6 Amp at 110V in North America, no dedicated service required
- Footprint: 30 in x 13 in x 28 in and 92 lbs, cart-friendly between rooms
Technical Specifications
| Specification | Value |
|---|---|
| Processing Capability (up to, per hour) | Wet: 35 lbs/hr · Dry: 7 lbs/hr |
| Cuts Per Minute | 3,500 to 35,000 |
| Number of Tumblers | 1 |
| Tumbler Diameter | 6.25 in |
| Tumbler Length | 27 in |
| Dimensions (L x W x H) | 30 in x 13 in x 28 in |
| Weight | 92 lbs |
| Input Voltage | 6 Amp at 110V (NA) · 3 Amp at 220V (EU/AUS) |
| Hopper | Food Grade Plastic |
| Body and Lid | Electroless Nickel Plated Aluminum |
| Cutting Reel | Nitrided |
| Reel Bearings | Food Grade Stainless Steel |
| Warranty | 10 years machine · 2 years VSC |
