Skip to product information
1 of 1
Brand: House & Garden

House and Garden Cocos A and B | Two-Part Coco Base Nutrient

House and Garden Cocos A and B | Two-Part Coco Base Nutrient

SKU: SKU:HG301

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $34.01 USD
Regular price Sale price $34.01 USD
Sale Sold out
Shipping calculated at checkout.

Availability: Online | Will Call Locations Stock May Vary

SIZE

Cocos A and B is the two-part base House and Garden built for coco coir. The macronutrient and magnesium ratios are matched to the cation exchange behaviour of the medium. Both parts go in at equal volume, never mixed in concentrate, and the tank is set to a pH of 5.8 to 6.3.

View full details

Why Cocos A and B Is Not the Same as a Soil Feed

Coco coir behaves like a buffer as much as a medium. Its cation exchange capacity holds and releases calcium, magnesium and potassium in ways soil does not. A feed written for soil walks straight into that. This base is formulated around that behaviour. The macronutrient and magnesium ratios are set for pure coco, or any blend carrying thirty percent coco or more. Part A reads 0.3 percent total nitrogen, of which 0.28 percent is nitrate and 0.02 percent ammoniacal, alongside 0.3 percent soluble potash. It is derived from calcium nitrate, ammonium nitrate, nitric acid and potassium hydroxide. Those are low headline numbers because this is a concentrate you dilute heavily rather than a ready mix. The working range runs from half a millilitre to three millilitres per litre of each part, which is roughly two to eleven millilitres per gallon. Where you sit in that range depends on the stage of growth and what your runoff is telling you.

Mixing a Two-Part Coco Fertilizer Without Losing Calcium

The sequence matters more here than the rate. Start with fresh water in the reservoir, then add part A, mix it through and let it stand. Only then add part B, mix again and let it stand a second time. Never put A and B together in concentrate. Calcium from one and sulfate or phosphate from the other will precipitate out and drop to the bottom of the drum. What lands on the floor of the tank is calcium your plant will never see. Use equal volumes of both parts every time, since the formulation is balanced on that assumption. Once both are in, set the tank to a pH between 5.8 and 6.3 before adding any stimulants. Coco itself will drift the tank over a few days, so check rather than assume. The line is built to run alongside the rest of the House and Garden range, so additives drop in without a compatibility question.

Key Features

  • Built For Coco: Macronutrient and magnesium ratios are set for the cation exchange behaviour of coco coir.
  • Thirty Percent Rule: It suits pure coco and any blend carrying thirty percent coco coir or more.
  • Equal Parts A And B: The formulation assumes equal volumes, so the two parts are always dosed one to one.
  • Wide Working Range: Half a millilitre to three millilitres per litre covers the whole cycle from young plants to late bloom.
  • Named Inputs: Derived from calcium nitrate, ammonium nitrate, nitric acid and potassium hydroxide.
  • Fits The Range: It runs alongside the rest of the House and Garden additives without a compatibility question.

Technical Specifications

Specification Value
Type Two-part base nutrient for coco coir
Cocos A Analysis 0.3% total N (0.28% nitrate, 0.02% ammoniacal), 0.3% K2O
Derived From Calcium nitrate, ammonium nitrate, nitric acid, potassium hydroxide
Rate 0.5-3 mL/L of each part (about 2-11 mL per gallon)
Mixing Fresh water, then A, mix and stand, then B, mix and stand
Warning Never mix A and B in concentrate
Target pH 5.8-6.3, set before adding stimulants
Media Pure coco coir or blends with 30% coco or more
Sizes 1 L, 5 L, 10 L, 20 L