A 35-inch IP56 cabinet for Hydro-X Pro control systems
The SCC-2 is a 35-inch modular enclosure built to house a Hydro-X Pro (HCS-2) or Aqua-X Pro (NFS-2) and everything wired to it. Its IP56 rating, equal to NEMA 4X, seals out dust and water, so a rack of device stations stays protected in a working room. A pre-cut opening mounts the main controller on the front, and five splitter boards plus 8+1+6 power outlets organize the modules inside. Growers wire it with the included RJ12 cables, then use the rubber gasket to lock in the IP56 seal.
Inside the SCC-2 controller cabinet
The detachable design makes assembly and service quick, and the all-in-one layout keeps controllers, power supplies, and cabling in one tidy box. It runs on 120V at up to 15 amps and holds up from 32 to 104 degrees F. One note: the SCC-2 fits the Pro-tier HCS-2 and NFS-2, so a standard Hydro-X uses the smaller SCC cabinet instead.
Key Features
- 35-Inch Modular Cabinet: Houses a Hydro-X Pro or Aqua-X Pro plus its device stations.
- IP56 Waterproof: NEMA 4X-equivalent seal keeps dust and water out.
- Pre-Cut Controller Opening: Mounts the HCS-2 or NFS-2 cleanly on the front.
- Organized Wiring: Five splitter boards and 8+1+6 outlets route modules and power.
- Complete Cable Set: Ships with long and short RJ12 cables and mounting hardware.
- Detachable Design: Comes apart for fast install and maintenance.
Technical Specifications
| Specification | Value |
|---|---|
| Size | 35 in L x 18 in W x 6.26 in H |
| Enclosure Rating | IP56 (NEMA 4X) |
| Compatibility | Hydro-X Pro (HCS-2), Aqua-X Pro (NFS-2) |
| Splitter Boards | 5 (10 / 6 / 17 / 4x4 / 6 ports) |
| Power Outlets | 8 + 1 + 6 |
| Input | 120V, max 15A |
| Operating Temp | 32-104 degrees F |
| In the Box | Cabinet, manual, 4 long + 26 short RJ12, 8 power cables, 18 screw sets |