CraftFarmer Daisy Chain Cable for Under Canopy V3 LED Rows
The CraftFarmer daisy chain cable runs 3 ft between CraftFarmer V3 Under Canopy LED fixtures and extends a powered chain row to row. It is the fixture-to-fixture jumper sized for the V3 family and pairs with the CraftFarmer 240V dimmable input cord at the head of the chain. The 3 ft length matches standard bench-to-bench spacing and bridges adjacent rows that the input cord cannot reach in a single line. The cable preserves both the AC line and the analog 0-10V dim signal, so the Mini Controller signal continues across every fixture. One cable per gap keeps the wiring loom tight.
Under Canopy LED Daisy Chain Cable for CraftFarmer V3 Bench Rows
Growers typically place daisy chain cables at every bench corner to keep the row tight along the rack uprights. The 3 ft length lines up with the typical row-to-row spacing on a commercial cultivation rack. Plan one cable per row gap, scaled to the rack layout. The cable is not a stand-alone power cord. It needs a powered CraftFarmer input cord at the chain head. The cable does not invent voltage out of thin air. Drop it into the existing chain whenever a single fixture run cannot span the next row. The chain head still drives the voltage. Drop a cable into each gap between rows.
Key Features
- 3 ft Length: Matches standard bench-to-bench spacing on commercial racks
- AC + 0-10V Dim Signal: Carries both lines so the dim chain stays continuous fixture to fixture
- CraftFarmer V3 Compatibility: Sized for the V3 Under Canopy LED fixture connectors
- Row-to-Row Daisy Chain: Bridges rows the input cord cannot reach in a single line
- Modular Scaling: One cable per row gap, scaled to your rack layout
Technical Specifications
| Specification | Value |
|---|---|
| Length | 3 ft |
| Function | Fixture-to-fixture jumper for CraftFarmer V3 Under Canopy LEDs |
| Carries | AC line + 0-10V analog dim signal |
| Compatibility | CraftFarmer V3 Under Canopy LED fixtures |
