DAB ESYBOX DIVER X 55/120 for Clean Draw From Storage Tanks
This X model shares the inverter drive and hydraulics of DAB's standard DIVER, with one key change. Instead of pulling water from around its base, the X version has a 1 in union inlet for a floating suction hose. A float holds the intake just below the surface, where the water is cleanest. The pump runs on 230V single phase at 50/60 Hz, with a motor rated about 1.3 HP. It moves up to 31.7 GPM and reaches a maximum head of about 180 ft. Factory pressure is 43 psi, adjustable from 14 to 80 psi. Delivery leaves through a 1-1/4 in NPT outlet. Power comes through a 49 ft cable with a NEMA 6-15P plug. A check valve and a 0.04 L expansion vessel are built into the body. The housing is rated IP68, and the motor carries Class F insulation.
Why a Floating Intake Suits a Rainwater Tank Pump
Rainwater carries roof grit, leaves and organic sludge that settle on the tank floor over time. A standard submersible draws from near that layer, so fine material can reach the impellers and emitters. Pulling from just under the surface avoids most of it and keeps drip lines cleaner. DAB offers a matching kit with a 1 m suction hose and float for this inlet. Size the hose so the float rides freely across the full range of tank levels. The inverter adjusts motor speed as zones open and close, so pressure stays even across the greenhouse. Pump data travels over the power cable to a DConnect Box 2, keeping control wiring out of the tank. Alarms and pressure readings then show up in DAB's app. Protections cover dry running, small-leak cycling and frozen delivery pipes. The pump handles clean water from 32 to 131°F, with ambient air up to 122°F.
Key Features
- Floating intake inlet: A 1 in union inlet takes a floating suction hose, so the pump draws the cleanest water.
- Inverter pressure control: Motor speed follows demand, which keeps pressure steady and trims energy use at low flow.
- Wide set point range: Adjustable from 14 to 80 psi to match drip, micro-spray or supply lines.
- Powerline communication: Pump data travels over the power cable to a DConnect Box 2 for app alarms and readings.
- Built-in hydraulics: Check valve and expansion vessel sit inside, so no external pressure tank is needed.
- IP68 submersible build: A sealed body and Class F motor suit continuous duty under water.
Technical Specifications
| Specification | Value |
|---|---|
| Model | ESYBOX DIVER X, size 55/120 |
| Part number | 60202768 |
| Power supply | 230V, 50/60 Hz, single phase |
| Motor | 1.3 HP (0.95 kW P2) |
| Max flow | 31.7 GPM |
| Max head | 180 ft |
| Pressure set point | 43 psi preset, adjustable 14-80 psi |
| Inlet | 1 in union for floating suction hose |
| Outlet | 1-1/4 in NPT |
| Power cable | 49 ft with NEMA 6-15P plug |
| Expansion vessel | 0.04 L, built in |
| Liquid temperature | 32-131°F |
| Max ambient temperature | 122°F |
| Max starts per hour | 60 |
| Protection rating | IP68 |
| Insulation class | F |
| Certifications | UL 778, CSA C22.2 No. 108-14 |