
DAB ESYCOVER NEMA 3 Kit for an ESYBOX Under Cover Outdoors
This green kit is DAB's outdoor installation cover for the full-size ESYBOX booster. It carries part number 60203667 and is listed for the 230V, 1 HP NEMA 3 ESYBOX model. DAB intends the ESYCOVER for partially external locations, such as under a balcony or a front porch roof. Fitted over the pump, it protects the display and control keypad on the front of the unit. Those are the parts most exposed to blown rain, dust and direct sun in an open-sided spot. The green finish matches DAB's NEMA 3 ESYBOX range. With the cover in place, the pump's settings and operation stay the same. It suits the full-size ESYBOX housing, while a separate Mini version is made for the ESYBOX Mini 3. Both covers are part of DAB's ESYBOX line of installation accessories. The kit gives an outdoor install a finished look without building a separate pump box.
Setting Up an ESYBOX Outdoor Cover Beside the Grow
Placing the booster outside the grow room keeps motor noise and service traffic out of the canopy space. Common spots include a covered pad by the water tank, a carport wall or a lean-to on a greenhouse. The cover handles the face of the pump, so the location still needs a roof or overhang above it. Set the pump on a solid, level base that drains away from the unit. Keep hoses and the power cord routed so dripping water cannot run toward the connections. Leave room around the booster for priming, draining and reading the display. Sweep leaves and dust away from the pump during routine checks. In regions with hard freezes, follow DAB's instructions for draining or sheltering the pump over winter. Use flexible connectors so pump vibration does not travel into rigid pipe. Confirm the ESYBOX model before ordering, since this kit fits the full-size unit only.
Key Features
- Display and keypad protection: Keeps blown rain, dust and sun off the front of a full-size ESYBOX.
- Partially outdoor installs: Made for porches, overhangs and open-sided sheds rather than open sky.
- Matched to the 1 HP model: Listed for the 230V, 1 HP NEMA 3 ESYBOX.
- Green NEMA 3 finish: Matches the green housing of DAB's NEMA 3 ESYBOX range.
- No pump box needed: Adds weather protection without building an enclosure around the booster.
Technical Specifications
| Specification | Value |
|---|---|
| Part number | 60203667 |
| Compatible pump | DAB ESYBOX, 230V 1 HP NEMA 3 model |
| Purpose | Outdoor (partially external) installation cover |
| Protects | Display and control keypad |
| Color | Green |