Heavy Duty 120V Extension Cord 12 ft | 3-Outlet 14-Gauge | UL

120V 3 outlet extension cord for tents and small grow rooms

The Hydrofarm 120V 12ft cord routes a 14-gauge copper feed to three NEMA 5-15R outlets across a 12-foot run. Rated for 15 amps and 1,800 watts, it lands a fan, a heat mat, and a small controller from one outlet. The grounded NEMA 5-15P plug fits any standard 120V receptacle in a household or grow-room wall. UL listing gives the building inspector a paper trail without a custom wiring sign-off. Heavy-duty molded outlets keep the strip from cracking when cords get yanked off-square.

120V 3 outlet extension cord that lands at the bench

Growers typically run the 12-foot length when the wall outlet sits within two strides of the bench. Place the cable with the strip at the bench side and the male plug seated to the wall outlet first. Across three outlets the trip stays predictable as long as the sum of accessory draw stays under 15 amps. On 1,800 watts of headroom, that's enough for a 6-inch inline fan, a heat mat, and a small dehumidifier. Indoor-only rating means dressing the cable above the splash zone, not along a wet floor or runoff path. And the heavy-duty molded outlet handles cord pull when a fan move pulls the strip mid-cycle. UL listing means the wiring inspector reads it the same way every time, regardless of the install crew. Pair the strip with a timer upstream so cycling happens at the timer, not by yanking accessories on and off.

Key Features

• 14-gauge copper, 12-foot reach: Carries 120V load across a tent or small bench without splice or extension.
• 3-outlet power strip: Lands a fan, heat mat, and controller from one wall outlet without daisy-chained taps.
• NEMA 5-15P 120V plug: Fits any standard household or grow-room outlet without rewiring.
• 15 amp / 1,800 watt cap: Predictable headroom for tent-scale accessory loads.
• UL Listed: Reads cleanly on inspection without custom wiring sign-off.

Technical Specifications