Heavy Duty 240V Extension Cord 25 ft | 3-Outlet 14-Gauge | 15A

240V extension cord 25 ft for far-set ballasts and benches

The Hydrofarm 240V 25ft cord stretches a 14-gauge copper feed to three outlets across a 25-foot run. Rated for 15 amps and 3,600 watts, it powers two HID ballasts plus a controller from one wall plug. The grounded 240V NEMA 6-15P plug seats in any standard 240V receptacle without panel rework. Heavy-duty molded outlets resist cracking when the strip catches a yank during fixture rotations. The longer run reaches across larger benches where the sub-panel sits across the room or behind the door.

240V 3 outlet extension cord that crosses the room

Growers typically reach for the 25-foot version when the sub-panel sits across an aisle or down a wall. Place the cord so the strip lands at the rack and the wall plug seats first at the breaker side. At 25 feet on 14-gauge copper the voltage drop is minimal under a balanced 3,600-watt load on 240V. Across three outlets the trip stays clean as long as the sum of fixture draw holds under 15 amps. Indoor-only rating means dressing the cord above the splash zone, not along a wet floor. And the heavier reach trims the splice or extension that growers reach for when 12 feet falls short. On a single 240V circuit, the strip consolidates panel pulls and keeps the breaker map readable. Pair the strip with a timer or controller upstream so cycling happens at the controller, not the outlet.

Key Features

• 14-gauge copper, 25-foot reach: Crosses the room without splice or extension on a single 240V branch.
• 3-outlet power strip: Lands two ballasts plus a controller from one wall outlet without daisy-chained taps.
• NEMA 6-15P 240V plug: Fits any standard 240V grow-room receptacle without rewiring the panel.
• 15 amp / 3,600 watt cap: Headroom for two 1,000W ballasts with room for a small controller.
• Heavy-duty molded outlet: Holds up to off-square cord tension when a fixture rotation moves the strip.

Technical Specifications