Faven Lighting 3 ft Jumper Cable for Under Canopy R6/R8 LEDs

Faven 3 ft Jumper Cable for Under Canopy R6 and R8 LED Rows

The Faven jumper cable runs 3 ft between Faven Under Canopy R6 or R8 LED fixtures. It extends the chain row to row across a bench. It bridges the gap between fixtures that the standard input cord cannot reach in a single line. Use it to wrap around bench corners, jump between adjacent rows, or close gaps where rack uprights interrupt the run. The cable carries both the AC line and the dimming wire, so a single jumper continues the daisy chain end to end. The connectors mate directly with the Faven cord ends used across the R6 and R8 line.

Under canopy LED jumper for Faven R6 R8 bench row-to-row runs

Growers drop a jumper at every bench corner to keep the row tight against the rack uprights. The 3 ft length lines up with standard bench-to-bench spacing in commercial rooms. Faven also offers the jumper in 9 ft and 20 ft for wider gaps. Daisy-chain capacity depends on the circuit: up to 10 fixtures at 120V, 17 at 240V, or 20 at 277V. The jumper is not a stand-alone power cord and needs a powered Faven input cord at the chain head. Plan one cable per gap, scaled to the layout.

Key Features

• 3 ft Length: Matches standard bench-to-bench spacing for clean rack runs.
• AC + Dimming Wire: Carries both the power line and the analog control signal in one cable.
• Faven R6 / R8 Fit: Direct-fit connectors mate with Faven Under Canopy R6 and R8 fixtures.
• Row-to-Row Daisy Chain: Bridges adjacent rows and corners the input cord can't reach.
• Also in 9 ft / 20 ft: Longer jumpers cover wider gaps across large benches.

Technical Specifications