FloraFlex DLC 1200W 6-Bar LED Grow Light | 100–277V, 3,480 µmol/s PPF

FloraFlex DLC Wattage-Adjustable 6-Bar LED Grow Light

The FloraFlex 6-Bar runs adjustable from 10W to 1200W on a 100–277V AC input. It pushes 3,480 µmol/s PPF at 2.9 µmol/J PPE. Samsung 301B whites paired with OSRAM Reds give a full-cycle spectrum. Coverage spans a 45×43 in canopy footprint at 17–24 in mounting height. The 73 lb fixture is UL 8800 and UL 1598 wet-location rated. IP65 sealed, passive cooling, with a 5-year standard warranty.

How the 6-Bar LED Holds a 5×5 Flower Room

Wattage-adjustable from a single 1200W LED grow light matters when scaling intensity across the cycle. Set it at 600W during transition and ramp to 1,200W once the canopy is built. The control runs on a 0–10V signal. Growers typically hang the fixture 17–24 inches above canopy in flower. Plan for a dedicated 240V circuit if you run more than two fixtures off the same panel. the fixture package ships with the controller and mounting hardware required to deploy.

Key Features

• Wattage Adjustable 10–1,200W: 0–10V control across the full range so the same fixture runs propagation, veg, transition, and full bloom.
• 3,480 µmol/s PPF at 2.9 µmol/J: Commercial-tier flux on a full-spectrum Samsung 301B + OSRAM Red blend covering 45 × 43 in.
• 6-Bar Layout: Distributes light across the canopy to reduce hot-spotting common on single-board fixtures at low mounting heights.
• 100–277V Wide Input: Runs on 120V residential, 240V single-phase, or 277V commercial service without a different driver SKU.
• IP65 Wet-Location Rated: UL 1598 wet-location and IP65 sealed for sealed-room or high-humidity finishing.
• L90 > 50,000 Hours: Diode degradation curve holds 90% output past the 50,000-hour mark, paired with a 5-year warranty.
• Passive Cooling: Fanless thermal management means no moving parts in the airflow path — less to clean, less to fail.

Technical Specifications