SPYDR 2i fixture Grow Light for High-PPFD 4x4 Bloom Rooms
The Fluence SPYDR 2i 630W LED delivers 1700 umol/s PPF at 2.7 umol/J fixture efficacy on autosensing 100-277V input. Average PPFD measures 1060 umol/m^2/s over 4x4 ft at 6 inches above canopy. Spectrum is PhysioSpec Indoor, a broad white profile sized for high-PPFD commercial cultivation. The fixture targets advanced commercial growers running CO2 supplementation; SPYDR 2i is not intended for beginners or growers without CO2 enrichment. The 47 inch grow light geometry distributes intense uniform light across 4x4 bench widths.
47 inch commercial top light for Stage-Specific Performance
Growers typically hang the SPYDR 2i at 6 to 12 inches above canopy in CO2-enriched flower rooms and. Ramp from 50 percent in transition through 100 percent in peak bloom for full 1060 umol/m^2/s PPFD delivery. The high-PPFD commercial top light geometry distributes uniformity through the canopy without hot spots that overhead bar-style fixtures sometimes drop on bench centers. Autosensing 100-277V LED grow light input drops the fixture into 120V test bays through 277V commercial bays. PhysioSpec Indoor spectrum ranks among the most measured commercial spectrum profiles in greenhouse cultivation deployments. The 1700 umol/s PPF fixture class targets 4x4 flowering coverage LED bench layouts where per-fixture density drives yield economics. Build quality holds up across multi-cycle commercial deployments. Per-fixture amp draw matters when sizing a high-density bloom panel. Stage-specific ramps reduce light stress during transition between veg and bloom. Field-replaceable drivers shorten downtime when service intervals come due. Spectrum consistency across fixture batches keeps cultivar response repeatable.
Key Features
- Power and PPF: 630W input delivers 1700 umol/s PPF at 2.7 umol/J fixture efficacy.
- PPFD Coverage: Average 1060 umol/m^2/s over 4x4 ft at 6 in canopy distance.
- PhysioSpec Indoor Spectrum: PhysioSpec Indoor spectrum tuned for high-PPFD commercial cultivation.
- Voltage Range: 100-277V autosensing LED grow light input fits residential and commercial.
- Use Case: Advanced commercial growers running CO2 supplementation in bloom rooms.
- Form Factor: 47-inch multi-bar geometry across 4x4 flowering coverage LED bench widths.
- Dimming Compatible: 0-10V control for staged ramps in commercial bloom and transition stages.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | Fluence SPYDR 2i |
| Input Power | 630W |
| PPF | 1700 umol/s |
| Photon Efficacy | 2.7 umol/J |
| Average PPFD | 1060 umol/m^2/s over 4x4 ft @ 6 in |
| Input Voltage | 100-277V autosensing |
| Spectrum | PhysioSpec Indoor (broad white) |
| Form Factor | 47-inch multi-bar top light |
| Use Case | High-PPFD commercial CO2-enriched bloom rooms |