Fluence SPYDR 2p 632W LED Grow Light | 1580 umol/s | 4x4 IP66 Commercial

Commercial Top Light: SPYDR 2p at 632W and 1580 µmol/s

The Fluence SPYDR 2p 632W LED grow light is a foldable spider-style commercial top light running 632W input power on universal 100-277 VAC. PPF lands at 1580 µmol/s with 2.5 µmol/J photon efficacy across the 400-700nm range. Spectrum is PhysioSpec Indoor — Fluence's broad full-cycle profile tuned for veg through bloom. Recommended coverage is a 4 ft x 4 ft canopy commercial top light footprint. Average PPFD over 4x4 reaches roughly 1060 µmol/m^2/s in the SPYDR 2 series at 6 inches above canopy. The chassis sits at 1.4 in low-profile for tight CO2-enriched flower bays.

Fluence SPYDR 2p PhysioSpec Indoor Full-Cycle LED with Passive Convection

Growers typically hang the SPYDR 2p 6 inches above canopy in CO2-enriched commercial flower bays, with 6-12 inch range acceptable for stage tuning. Then ramp from 50 percent in transition through full output in peak bloom on the included 0-10V dimmer. Passive convection through anodized extruded aluminum heatsinks eliminates fans across the multi-bar geometry. IP66 dust-tight wet-location rating, ETL/UL 8800/UL 1598 wet-location certification, plus DLC and CE listings cover commercial regulatory paperwork. Daisy-chain capacity reaches 50 fixtures per drop on Fluence Dimmer or 0-10V/PWM control. Operating ambient temperature spans -10 to 35 C in still air for typical indoor rooms. Build quality holds up across multi-cycle commercial deployments. Per-fixture amp draw matters when sizing a high-density bloom panel. Spectrum consistency across fixture batches keeps cultivar response repeatable. Stage-specific ramps reduce light stress during transition between veg and bloom. Field-replaceable drivers shorten downtime when service intervals come due.

Key Features

• Power and Output: 632W input delivers 1580 µmol/s PPF at 2.5 µmol/J efficacy on 100-277V.
• PhysioSpec Indoor Full-Cycle Spectrum: Broad full-cycle spectrum tuned for veg through bloom on a single SKU.
• Coverage and PPFD: 4x4 ft canopy commercial top light at ~1060 µmol/m^2/s average PPFD.
• Form Factor: Foldable spider-style bar at 1.4 in low-profile chassis for tight bays.
• Passive Convection Cooling: Anodized extruded aluminum heatsink eliminates fans and moving parts.
• IP66 Rated Build: Dust-tight wet-location rating with UL 8800 and UL 1598 certifications.
• Certifications: ETL Listed, UL 8800, UL 1598 Wet-Location, CE, DLC for commercial paperwork.
• Dimming: Fluence Dimmer / 0-10V / PWM compatible; daisy-chain up to 50 fixtures.
• Operating Temperature: -10 C to 35 C still-air ambient for indoor flower rooms.
• Mounting Height: 6 in above canopy recommended (6-12 in acceptable range).

Technical Specifications